Page 206 - 02. Subyek Computer Aided Design - Beginner’s Guide to SOLIDWORKS 2019- Level 1 by Alejandro Reyes

Part Modeling

For the 'Worm Gear' we will make a simplified version of a gear without

teeth, and after covering the Sweep feature it will be modified to add the gear. The

intent of this book is not to go into gear design, but rather to help the user

understand and learn how to use basic SOLIDWORKS functionality. With this part

we'll learn a new extrusion (or cut) end condition called "Mid Plane," how to

chamfer the edges of a model, a special dimensioning technique to add a diameter

dimension to a sketch used for a revolved feature, and how to dimension to a

circle's perimeter. We'll also practice previously learned commands. For the 'Worm

Gear' we will follow the next sequence of features.

Mid Plane Extrusion Revolved Cut 1 Revolved Cut 2 Mirror

Chamfer Fillet Keyway Cut

6.1. - Start by making a new part using with a template with English units, set the

material to "AISI 1 020" Steel and create the following sketch in the "Front Plane."

.---- <1.>2.250

(/).625 --.

201