Page 256 - 02. Subyek Computer Aided Design - Beginner’s Guide to SOLIDWORKS 2019- Level 1 by Alejandro Reyes

Beginner's Guide to SOLIDWORKS 2019- Level I

8.9. - Now we need to round the flat face at the top lip of the cup. To do this we'll

add a "Fillet" using the "Full Round Fillet" option. The full round will essentially

remove the flat face at the top (the middle face) and replace it with a rounded face

tangent to both the start and end faces.

Before After

We need to select three faces; the middle face will be the one replaced by the fillet.

After selecting the Fillet command, select the "Full round fillet" option to reveal the

selection boxes. With the first selection box active select the outside face of the

cup. Click inside the second selection box and select the top flat face of the cup.

Click inside the third selection box and select the inside face of the cup. Note the

selected faces are color coded. When done selecting faces click OK to apply the

fillet.

lj3 Fillet
Side Face Set 1

~ X

Manual Filletxpert
-

Fillet Type

Items To Fillet

~ Face <1>

Face<2>
Side Face Set 2

0

0 Tangent propagation

@ Full preview

0 Partial preview

0 No preview

•

252