Page 296 - 02. Subyek Computer Aided Design - Beginner’s Guide to SOLIDWORKS 2019- Level 1 by Alejandro Reyes

Beginner's Guide to SOLIDWORKS 2019- Level I

After selecting the profiles, from the "Start/End Constraints" options select

"Normal to Profile" for both the "Start" and "End" constraint using the default values.

Notice the difference in the preview after selecting the start and end constraints.

In the "Options" section activate the "Merge tangent faces" to generate a single,

continuous surface with the loft. Click OK when done.

~ Loft

-./ X

0
<>

Sketch2

Sketch3

Sketch4

0

Start/End Constraints

Start constraint:

Normal To Profile v

IGI I O.OOdeg

~ .._, _______ ~

0 Apply to all

End constraint:

Normal To Profile v

1~+1 I O.OOdeg

~ ~~,----------~~ ~

0 Apply to all

Guide Curves v

Optionally, we can turn on the curvature display for the preview; this will

allow us to better visualize the final shape using a mesh, zebra stripes

and/or curvature combs. The zebra stripes help us visualize the continuity

of the curvature in the model's surfaces. This is particularly useful when designing

consumer products with a high aesthetic requirement.

0 rvature Display

0 Mesh preview

Mesh density:

4

L- r-------------~

0 Zebra stripes

D Curvature combs

294