Page 394 - Biaxial Multiaxial Fatigue and Fracture

378 M. FONTE ET AL.

9, Ming Gao, Pao, P.S. and Wei, R.P. (1988) Chemical and metallurgical aspects of
environmentally assisted fatigue crack growth in 7075-7551 aluminum alloy. Metall.
Transactions A, 19 A, 1739-1750.
10. Vasudkvan, A.K, Doherty, R.D., Suresh, S.( 1989) Fracture and Fatigue Characteristics
in Aluminium Alloys. In: Treatise on Matls Sci. and Technology 31,445-461.
11. Venkateswara, K.T., Ritchie, R.O. (1989) Mechanical properties of AI-Li alloys-
Fracture toughness and microstructure and fatigue crack propagation- Part I and Part
2. Matls Sci Technology 5,882.
12. Barlat, F. an'd Vasudkvan, A.K. (1991) fnjluence of Precipitate Microstructure on Flow
and Forming Properties of an Aluminum Alloy Sheet. Acta Metall. Materls. 39,3,391.
13. Renaud, P., Violan, P., Petit, J., Ferton, D.( 1982) Microstrutural influence on fatigue
crackgrowth near threshold in 7075 AI alloy. Scripta Metallurgica 16, 131 1-1316.
14. Vasudkvan, A.K. and Doherty, R.D. (1987) Grain Boundary Ductile Fracture in
Precipitation Hardened Aluminum Alloys. Overview 58. Acta Metall., 35,6, 1193-1219.
15. Pelloux, R.M. , Stoltz, R.E. and Moskovitz, J.A. (1976) Corrosion Fatigue. Matls Sci.
Engng 25, 193-200.
16. Speidel, M.O. (1979) Stress corrosion and corrosion fatigue crack growth in aluminium
alloys. In: Stress Corrosion Research. Arup H and Parkins R.N. (Eds), The Netherlands,
Sijthoff and Noordhoff Alphen van den Rijn, The Netherlands, 1 17- 176.
17. Holroyd, N.J. and Vasudkan, A.K.( 1984) Stress Corrosion of High-Strength Aluminum
Alloys. In: Treatise on Materials Science and Technology, 31,463-481.
18. Suresh, S. and Ritchie, R.O. (1983) On the influence of environment on the load ratio
dependence of fatigue threshold in pressure vessel steel. Engng Fract Mech. 18,785.
19. Stanzl, S., Mayer, H.,Tschegg, E.(1991) ne influence of air humidity on near-threshold
fatigue crackgrowth of 2024-T3 aluminum alloy. Mat. Sci. Engng, A147,45-54.
20. Tschegg-Stanzl, S., Plasser O., Tschegg, E. K. and Vasudtvan, A K. (1999) Influence of
microstructure and load ratio on fatigue threshold behaviour in 7015 aluminium alloy.
Int. J. Fatigue 21, S255-262.
21. Mayer, H. (1999) Fatigue crack growth and threshold measurements at very high
frequencies. International Materials Reviews, 44 (1) 1-34.
22. Vasudtvan, A. K., Sadananda, K. and Rajan, K. (1997), Role of microstructures on
growth of long fatigue cracks. Int. J. Fatigue 19, 1, S151-Sl59.
23. Holper, B., Mayer, H., Vasudevan, Stanzl-Tschegg, S.(2002) Near threshold fatigue
crack growth in aluminium alloys at low and ultrasonic frequency: influences of
specimen thickness, strain rate, slip behaviour and air humidity. International Journal
of. Fatigue (submitted).
24. Fonte, M.A., Stanzl-Tschegg, S.E., Holper, B., Tschegg, E.K. and Vasudtvan, A.K.
(2001) The microstructure and environment injluence on fatigue crack growth in 7049
aluminum alloy at different load ratios. Int. J. Fatigue, 23, S3 11-S3 17.
25. Kirby, B.R, Beevers, C.J. (1 979). Slow fatigue crack growth and threshold behaviour in
air and vacuum of commercial aluminium alloys, Fat Fract Engg Matls Struct 1,203.
26. Lin, F.S. and Starke, E.A.Jr. (1981). In: Hydrogen in Metals, Thompson and Bemstein
(Eds), TMS-AIME, Warrendale, PA, 485.
27. Ranganathan, N., Bouchet, €3. Petit, J.(1987) Fractographic aspects of the eflect of
environment on the fatigue crack propagation mechanism in a high-strength aluminum
alloy. In: Masters, J.E., Au, J.J. (Eds). Philadelphia (PA), ASTM STP 948,424-446.
28. Elber, W. (1971) The signzjicance of fatigue crack closure. Damage tolerance in
aircraft structures. ASTM STP 486,230-242.