Page 308 - Biomedical Engineering and Design Handbook Volume 1, Fundamentals

VIBRATION, MECHANICAL SHOCK, AND IMPACT 285

ISO 13091-2, Mechanical Vibration—Vibrotactile Perception Thresholds for the Assessment of Nerve
Dysfunction—Part 2: Analysis and Interpretation of Measurements at the Fingertips, International
Organization for Standardization, Geneva, 2003.
Linqvist, B. (ed.): Ergonomic Tools in Our Time, Atlas-Copco, Stockholm, Sweden, 1986.
Mansfield, N. J.: Human Response to Vibration, CRC Press, Boca Raton, 2005.
Martin, B. J., and D. Adamo: “Effects of Vibration on Human Systems: A Neurophysiological Perspective,” Can.
Acoust. Assoc. J., 29:3, 10 (2001).
Mertz, H. J.: “Anthropometric Test Devices”, Chap. 4 in Nahum, A. M., and J. W. Melvin (eds.): Accidental
Injury—Biomechanics and Prevention, 2d ed. Springer-Verlag, New York, 2002a.
Mertz, H. J.: “Injury Risk Assessments Based on Dummy Responses,” Chap. 5 in Nahum, A. M., and J. W.
Melvin (eds.), Accidental Injury—Biomechanics and Prevention, 2d ed., Springer-Verlag, New York, 2002b.
Morrison, J. B., S. H. Martin, D. G. Robinson, G. Roddan, J. J. Nicol, M. J-N. Springer, B. J. Cameron, and J. P.
Albano: “Development of a Comprehensive Method of Health Hazard Assessment for Exposure to Repeated
Mechanical Shocks,” J. Low Freq. Noise Vib., 16:245 (1997).
Nahum, A. M., and J. W. Melvin (eds.): Accidental Injury—Biomechanics and Prevention, 2d ed. Springer-
Verlag, New York, 2002.
Nicol, J., J. Morrison, G. Roddan, and A. Rawicz: “Modeling the Dynamic Response of the Human Spine to
Shock and Vibration Using a Recurrent Neural Network,” Heavy Vehicle Systems, Special Series, Int. J.
Vehicle Design, 4:145 (1997).
Payne, P. R., “On Quantizing Ride Comfort and Allowable Accelerations,” Paper 76-873, AIAA/SNAME
Advanced Marine Vehicles Conf., Arlington, Va., American Institute of Aeronautics and Astronautics, New
York, 1976.
Pelmear, P. L., and D. E. Wasserman (eds.): Hand-Arm Vibration, 2d ed., OEM Press, Beverly Farms, Mass.,
1998.
Peterson, D. R., and M. G. Cherniack: “Repetitive Impact from Manual Hammering: Physiological Effects on the
Hand-Arm System,” Can. Acoust. Assoc. J. 29:3; 12 (2001).
Peterson, D. R., A. J. Brammer, and M. G. Cherniack: “Exposure Monitoring System for Day-Long Vibration and
Palm Force Measurements,” Int. J. Industrial Ergonomics, in press.
Reynolds, D. D.: “Design of Antivibration Gloves,” Can. Acoust. Assoc. J. 29:3; 16 (2001).
RTO-MP-20, Models for Aircrew Safety Assessment: Uses, Limitations and Requirements, North Atlantic Treaty
Organization, Neuilly sur Seine, France, 1999.
SAE J885, Human Tolerance to Impact Conditions as Related to Motor Vehicle Design, Society of Automotive
Engineers, Warrendale, Pa. 1986.
Seidel, H.: “On the Relationship between Whole-Body Vibration Exposure and Spinal Health Risk,” Ind. Health,
43:361 (2005).
Seidel, H., and M. J. Griffin: “Modeling the Response of the Spinal System to Whole-Body Vibration and
Repeated Shock,” Clinical Biomechanics, Supplement 1, 16:S3 (2001).
von Gierke, H. E.: “Biodynamic Models and their Application,” J. Acoust. Soc. Am. 50:1397 (1970).
von Gierke, H. E.: “Effects of Vibration and Shock on People,” Chap. 145 in Crocker, M. (ed.), Encyclopedia of
Acoustics, Academic Press, New York, 1997.
von Gierke, H. E., and A. J. Brammer: “Effects of Shock and Vibration on Humans,” Chap. 42 in Harris, C. M.,
and A. G. Piersol (eds.), Harris’ Shock and Vibration Handbook, 5th ed. McGraw-Hill, New York, 2002.
von Gierke, H. E., H. L. Oestreicher, E. K. Franke, H. O. Parrach, and W. W. von Wittern: “Physics of Vibrations
in Living Tissues,” J. Appl. Physiol., 4:886 (1952).