Page 110 - Build a Remote Controlled Robot

FIGURE 5-11. Remove these sections from spout. ARMS AND SUBSYSTEMS 77

FIGURE 5-12. Template for drink tank brackets.

the 1-gallon milk container in position. Place the container on the
base and press the metal brackets around it; the metal will bend
to the shape of the container. Now mark the location of the
brackets mounting tabs, remove the container, and screw
the brackets in place using four 1/8-inch wood screws.
Next is the pump which is mounted in the right rear corner
of the base. It too is held in place by 1/8-inch wood screws.
Near the pump on the back edge of the base, mount the barrier
strip and fuse holder; make sure to allow about an inch