Page 70 - Build a Remote Controlled Robot

FIGURE 2-31. Mounted outlet. BODY FRAMEWORK 37

then screwed to the bracket and the whole assembly bolted to
the lower front section of Questor’s framework utilizing two
1/4-inch predrilled holes at that location. Figure 2-31 shows
where and how the outlet assembly is mounted. Now that
both the vacuum and outlet are mounted, they must be joined
by a short section of black hose included in your vacuum kit.
Cut a piece of hose approximately 3 inches long. To connect
the vacuum to the outlet, unscrew the outlet from the bracket,
then connect the hose to the vacuum. Next connect the outlet
to the other end of the hose and screw it back to the bracket.
The mounting procedure just described is also used to change
the vacuum cleaner’s bags, so it is important that you under-
stand this assembly. Questor’s framework is not yet complete.