Page 15 - CNC Robotics
P. 15
Chapter 1 / Design
uses lineal bearings running on guide rails to move th e copy board
as we ll as the bellows.
Th e slide employed to move the bellows and copy board would
work we ll as the y-axis for my CNC machine. And it was comp lete
with beari ngs and holders built in to the slide, as pictu red in
Figures 1.5 and 1.6.
Figure 1 .5
NuArc Camera, part
number 82 is the
guide rail.
:~~
86 85 :4--- 18
81 d>--'"88
86
• 85 ;
64
7
