Page 300 - CNC Robotics

CNC Robotics

N015 GOl X013.517 ZOOO.240
N016 GOl X013.62l ZOOO.243
N017 GOl X013 .673 ZOOO.242
N018 GOl X013.724 ZOOO.238
N019 GOl X013.9l8 ZOOO.215
N020 GOl X014.005 ZOOO.202
N02l GOl X014.063 ZOOO.194
N022 GOl X014.441 ZOOO.125
N023 GOl X014.727 ZOOO.125
N024 GOl X014.964 ZOOO.222
N025 GOl X015.l9l ZOOO.222
N026 GOO ZO.5
N027 GOO XOOO.OOO ZOOO.OOO
N028 M05
N029 M30

You need to do a little more editing. In lin e N006 change the Z to a
Y. Remove lin e NOOS and change the Z in line N027 to a Y. You only
want moveme nt on the z- and x-axis: the y-axis must rema in sta-
tionary; that is w hy the y-axis was zeroed at the center of th e piece
to be milled and any reference to the y-axis in the G-code must be
only 000.000. Remove the line numbers with the edito r and then add
the numbers back again . After final editing it w ill look like th is:

NOOl [KCAM CONVERSION]
N002 [ORIGINAL FILE: LA THECOREL3.PLT]
N003 %
N004 G90
N005 M03
N006 GOO ZO.5
N007 GOO XOOO.OOO YOOO.OOO
N008 GOl XOOO.220 ZOOO.254
N009 GOl X002 .283 ZOOO.254
NOlO GOl X006 .184 ZOOO.086
NOl l GOl X009 .745 ZOOO.086
N012 GOl X012.26l ZOOO.19l
N013 GOl X013 .3l0 ZOOO.228
N014 GOl X013.4l3 ZOOO.233

290