Page 409 - Cam Design Handbook

THB12 9/19/03 7:34 PM Page 397

CAM SYSTEM DYNAMICS—ANALYSIS 397

Chen, F.Y., and Polvanich, N., “Dynamics of High Speed Cam-Driven Mechanisms, Part I: Linear
System Models,” Transactions of the ASME, Journal of Engineering for Industry, 97E (3):
769–776, 1975a.
Chen, F.Y., and Polvanich, N., “Dynamics of High Speed Cam-Driven Mechanisms: Part II Nonlin-
ear System Models” Transactions of the ASME, Journal of Engineering for Industry, 97B: 777–784,
1975b.
Curtis, D.F., “Flywheels,” Standard Handbook of Machine Design, ed. by T.E. Shigley and C.R.
Miske, McGraw-Hill, New York, 1996.
Eliss, N.S., Jr., “Vibration of Cams Having Two Degrees of Freedom,” Journal of Engineering for
Industry, 86: 343–350, November 1964.
Erdman, A.G., Modern Kinematics—Developments in the Past Forty Years, John Wiley, New York,
1993.
Freudenstein, F., “On the Dynamics of High-Speed Cam Profiles,” International Journal of Mechan-
ical Science, I: 342–249, 1960.
Hanachi, S., and Freudenstein, F., “The Development of a Predictive Model for the Optimization of
High-Speed Cam-Follower Systems with Coulomb Damping, Internal Frication, and Elastic and
Fluidic Elements,” Transactions of the ASME, Journal of Mechanisms, Transmissions, and Automa-
tion in Design, 108: 506–515, 1986.
Hrones, J.A., “Analysis of Dynamic Forces in a Cam-Driven System,” Transactions of the ASME,
70: 473–482, 1948.
Jehle, F., and Spiller, W.R., “Idiosyncrasies of Valve Mechanisms and Their Causes,” SAEJ, 24:
133–143, 1929.
Kim, H.R., and Newcombe, W.R., “The Effect of Cam Profile Errors and System Flexibility on Cam
Mechanism Output,” Mech. Mach. Theory, 16: 4, 1981.
Koster, M.P., “Effect of Flexibility of Driving Shaft on the Dynamic Behavior of a Cam Mechanism,”
ASME Journal of Engineering for Ind., 97B (2): 595–602, 1975.
Koster, M.P., Vibration of Cam Mechanisms, Macmillan, London, 1970.
Koster, M.P., “Digital Simulation of the Dynamics of Cam Follower and Camshafts,” Fourth World
Congress of the Theory of Machine and Mechanisms, pp. 969–974. Mechanical Engineering Publ.,
London, 1975a.
Koster. M.P., “Effect of Flexibility of Driving Shaft on the Dynamic Behavior of a Cam Mechanism,”
Transactions of the ASME, 97 (2): 595–602, 1975b.
Mitchell, D.B., “Tests on Dynamic Response of Cam-Follower-Systems,” Mechanical Engineering,
72: 467–471, June 1950.
Pisano, A.P., and Freudenstein, F., “An Experimental and Analytical Investigation of the Dynamic
Response of a High-Speed Cam Follower System: Parts 1 & 2,” Transactions of the ASME, Journal
of Mechanisms, Transmissions, and Automation in Design, 105 (4): 692–704, 1983.
Rothbart, H., “Cam Dynamics,” Proc. Int. Conference on Mechanisms, pp. 141–155, Shoe String
Press, New Haven, Conn, 1961.
Shigley, J., and Mischke, C., Standard Handbook of Machine Design, Chap. 18, D. Curtis, McGraw-
Hill, New York, 1996.
Szakallas, L.E., and Savage, M., “The Characterization of Cam Drive System Windup,” Trans. ASME,
J. Mech. Des., 102 (2): 278–285, 1980.
Talbroudet, G.J., The Dynamic Synthesis, Analysis, and Design of Modeled Cam Systems, Lexington
Books, Lexington, Mass., 1976.
Timoshenko, S., Vibration Problems in Engineering, Third Edition, D. Van Nostrand Co., New York,
1955.
Turkish, M.C., “The Relationship of Valve Spring Design to Valve Gear Dynamics and Hydraulic
Lifter Pump-up,” Trans. SAE 61: 707, 1953.