Page 48 - Characterization and Properties of Petroleum Fractions
P. 48

QC: IML/FFX
              P2: IML/FFX
  P1: IML/FFX
                        AT029-Manual-v7.cls
            AT029-Manual
  AT029-01
                                           June 22, 2007
         28 CHARACTERIZATION AND PROPERTIES OF PETROLEUM FRACTIONS
            Chemistry Symposia, American Chemical Society (ACS),
                                                                  “Characterization of Petroleum Fractions,” Industrial and
            Vol. 40, No. 8, 2001, pp. 1975–1980.  T1: IML  14:26  [57] Watson, K. M., Nelson, E. F., and Murphy, G. B.,
         [36] Poling, B. E., Prausnitz, J. M., and O’Connell, J. P., Properties of  Engineering Chemistry, Vol. 27, 1935, pp. 1460–1464.
            Gases and Liquids, 5th ed., McGraw-Hill, New York, 2000.  [58] Brule, M. R., Kumar, K. H., and Watanasiri, S.,
         [37] Mattax, C. C. and Dalton, R. L., Reservoir Simulation, SPE  “Characterization Methods Improve Phase Behavior
            Nomograph 13, Society of Petroleum Engineers, Richardson,  Predictions,” Oil & Gas Journal, February 11, 1985, pp. 87–93.
            TX, 1990.                                         [59] Riazi, M. R., Al-Sahhaf, T. A., and Al-Shammari, M. A.,
         [38] Riazi, M. R. and Faghri, A., “Effect of the Interfacial Drag on  “A Generalized Method for Estimation of Critical Constants,”
            Gas Absorption with Chemical Reaction in a Vertical Tube,”  Fluid Phase Equilibria, Vol. 147, 1998, pp. 1–6.
            American Institute of Chemical Engineers Journal,  [60] Dohrn, R. and Pfohl, O. “Thermophysical
            Vol. 32, No. 4, 1986, pp. 696–699.                    Properties—Industrial Directions,” Paper presented at the
         [39] Dabir, B., Riazi, M. R., and Davoudirad, H. R., “Modeling of  Ninth International Conference on Properties and Phase
            Falling Film Reactors,” Chemical Engineering Science, Vol. 51,  Equilibria for Product and Process Design (PPEPPD 2001),
            No. 11, 1996, pp. 2553–2558.                          Kurashiki, Japan, May 20–25, 2001.
         [40] Riazi, M. R., Whitson, C. H., and da Silva, F., “Modelling of  [61] McCabe, W. L., Smith, J. C., and Harriot, P., Unit Operations of
            Diffusional Mass Transfer in Naturally Fractured Reservoirs,”  Chemical Engineering, 4th ed., McGraw-Hill, New York, 1985.
            Journal of Petroleum Science and Engineering, Vol. 10, 1994,  [62] Peridis, S., Magoulas, K., and Tassios, D., “Sensitivity of
            pp. 239–253.                                          Distillation Column Design to Uncertainties in Vapor–Liquid
         [41] Riazi, M. R. and Whitson, C. H., “Estimating Diffusion  Equilibrium Information,” Separation Science and Technology,
            Coefficients of Dense Fluids,” Industrial and Engineering  Vol. 28, No. 9, 1993, pp. 1753–1767.
            Chemistry Research, Vol. 32, No. 12, 1993, pp. 3081–3088.  [63] Riazi, M. R. and Mansoori, G. A., “Simple Equation of State
         [42] Riazi, M. R., “A New Method for Experimental Measurement of  Accurately Predicts Hydrocarbon Densities,” Oil and Gas
            Diffusion Coefficient in Reservoir Fluids,” Journal of Petroleum  Journal, July 12, 1993, pp. 108–111.
            Science and Engineering, Vol. 14, 1996, pp. 235–250.  [64] Lee, B. I. and Kesler, M. G., “A Generalized Thermodynamic
         [43] Kister, H. Z., Distillation Operations, McGraw-Hill, New York,  Correlation Based on Three- Parameter Corresponding States,”
            1990.                                                 American Institute of Chemical Engineers Journal, Vol. 21, No. 5,
         [44] Villoria, C. M., Anselmi, A. E., Intevep, S. A., and Garcia, F. R.,  1975, pp. 510–527.
            “An Oil Spill Fate Model,” SPE23371, Society of Petroleum  [65] Riazi, M. R. and Daubert, T. E., “Application of Corresponding
            Engineers, 1991, pp. 445–454.                         States Principles for Prediction of Self-Diffusion Coefficients in
         [45] Whitson, C. H. and Brule, M. R., Phase Behavior, Monograph  Liquids,” American Institute of Chemical Engineers Journal,
            Volume 20, Society of Petroleum Engineers, Richardson, TX,  Vol. 26, No. 3, 1980, pp. 386–391.
            2000.                                             [66] Riazi, M. R. and Mansoori, G. A., “Use of the Velocity of Sound
         [46] Firoozabadi, A., Thermodynamics of Hydrocarbon Reservoirs,  in Predicting the PVT Relations,” Fluid Phase Equilibria, Vol. 90,
            McGraw-Hill, New York, 1999.                          1993, pp. 251–264.
         [47] Daubert, T. E. and Danner, R. P., Eds., API Technical Data  [67] Shabani, M. R., Riazi, M. R., and Shaban, H. I., “Use of Velocity
            Book—Petroleum Refining, 6th ed., American Petroleum   of Sound in Predicting Thermodynamic Properties from Cubic
            Institute (API), Washington, DC, 1997.                Equations of State,” Canadian Journal of Chemical Engineering,
         [48] AIChE DIPPR R  Database, Design Institute for Physical  Vol. 76, 1998, pp. 281–289.
            Property Data (DIPPR), EPCON International, Houston, TX,  [68] Riazi, M. R. and Roomi, Y. A., “Use of Velocity of Sound in
            1996.                                                 Estimating Thermodynamic Properties of Petroleum
         [49] Rowley, R. L., Wilding, W. V., Oscarson, J. L., Zundel, N. A.,  Fractions,”Preprints of Division of Petroleum Chemistry
            Marshall, T. L., Daubert, T. E., and Danner, R. P., DIPPR Data  Symposia, American Chemical Society (ACS), August 2000,
            Compilation of Pure Compound Properties, Design Institute for  Vol. 45, No. 4, pp. 661–664.
            Physical Properties (DIPPR), Taylor & Francis, New York, 2002  [69] Riazi, M. R. and Faghri, A., “Prediction of Thermal
            (http://dippr.byu.edu).                               Conductivity of Gases at High Pressures,” American Institute of
         [50] Thermodynamic Research Center, National Institute of  Chemical Engineers Journal, Vol.31, No.1, 1985, pp. 164–167.
            Standards and Technology (NIST), Boulder, CO, URL:  [70] Riazi, M. R. and Faghri, A., “Thermal Conductivity of Liquid  --`,```,`,``````,`,````,```,,-`-`,,`,,`,`,,`---
            http://www.nist.gov/.                                 and Vapor Hydrocarbon Systems: Pentanes and Heavier at Low
         [51] Riazi, M. R. and Daubert, T. E., “Analytical Correlations  Pressures,” Industrial and Engineering Chemistry, Process
            Interconvert Distillation Curve Types,” Oil and Gas Journal,  Design and Development, Vol. 24, No. 2, 1985, pp. 398–401.
            August 25, 1986, pp. 50–57.                       [71] Ahmed, T., Hydrocarbon Phase Behavior, Gulf Publishing,
         [52] Riazi, M. R. and Daubert, T. E., “Improved Characterization of  Houston, TX, 1989.
            Wide Boiling Range Undefined Petroleum Fractions,” Industrial  [72] Danesh, A., PVT and Phase Behavior of Petroleum Reservoir
            and Engineering Chemistry Research, Vol. 26, 1987, pp. 629–632.  Fluids, Elsevier, Amsterdam, 1998.
         [53] Riazi, M. R. and Daubert, T. E., “Predicting Flash Points and  [73] Tsonopoulos, C., Heidman, J. L., and Hwang, S.-C.,
            Pour Points of Petroleum Fractions,” Hydrocarbon Processing,  Thermodynamic and Transport Properties of Coal Liquids, An
            September 1987, pp. 81–84.                            Exxon Monograph, Wiley, New York, 1986.
         [54] Riazi, M. R., “A Distribution Model for C 7+ Fractions  [74] National Institute of Standards and Technology (NIST),
            Characterization of Petroleum Fluids,” Industrial and  Boulder, CO, 2003 (http://webbook.nist.gov/chemistry/).
            Engineering Chemistry Research, Vol. 36, 1997, pp. 4299–4307.  [75] Ahmed, T., Reservoir Engineering Handbook, Gulf Publishing,
         [55] Riazi, M. R., “Distribution Model for Properties of  Houston, TX, 2000.
            Hydrocarbon-Plus Fractions,” Industrial and Engineering  [76] Edmister, W. C. and Lee, B. I., Applied Hydrocarbon
            Chemistry Research, Vol. 28, 1989, pp. 1731–1735.     Thermodynamics, 2nd ed., Gulf Publishing, Houston, TX, 1985.
         [56] Riazi, M. R. and Al-Sahhaf, T. A., “Physical Properties of Heavy  [77] HYSYS, “Reference Volume 1., Version 1.1”, HYSYS Reference
            Petroleum Fractions and Crude Oils,” Fluid Phase Equilibria,  Manual for Computer Software, HYSYS Conceptual Design,
            Vol. 117, 1996, pp. 217–224.                          Hyprotech Ltd., Calgary, Alberta, Canada, 1996.
















   Copyright ASTM International
   Provided by IHS Markit under license with ASTM             Licensee=International Dealers Demo/2222333001, User=Anggiansah, Erick
   No reproduction or networking permitted without license from IHS  Not for Resale, 08/26/2021 21:56:35 MDT
   43   44   45   46   47   48   49   50   51   52   53