Page 148 - Chemical engineering design

128
CHEMICAL ENGINEERING
GUNDERSEN,T. and NAESS, L. (1988). Comp. and Chem. Eng., 12, No. 6, 503. The synthesis of cost optimal
heat-exchanger networks an industrial review of the state of the art.
HIMMELBLAU, D. M. (1995) Basic Principles and Calculations in Chemical Engineering, 6th edn (Pearson).
HINCHLEY, P. (1975) Inst. Mech. Eng. Conference on Energy Recovery in the Process Industries, London. Waste
heat boilers in the chemical industry.
HOLMANN, E. C. (1971) PhD Thesis, University of South California, Optimum networks for heat exchangers.
HOLLAND,F.A. and DEVOTTA, S. (1986) Chem. Engr, London, No. 425 (May) 61. Prospects for heat pumps
in process applications.
ICHEME (1994) User Guide on Process Integration for Efficient Use of Energy, revised edn (Institution of
Chemical Engineers, London).
JENETT, E. (1968) Chem. Eng., NY 75 (April 8th) 159, (June 17th) 257 (in two parts). Hydraulic power recovery
systems.
KENNEY, W. F. (1984) Energy Conversion in the Process Industries, Academic Press.
LINNHOFF,B. and FLOWER, J. R. (1978) AIChEJI 24, 633 (2 parts) synthesis of heat exchanger networks.
LINNHOFF,B., MASON,D. R. and WARDLE, I. (1979) Comp. and Chem. Eng. 3, 295, Understanding heat
exchanger networks.
LINNHOFF,B., DUNFORD,H. and SMITH R. (1983) Chem. Eng. Sci. 38, 1175. Heat integration of distillation
columns into overall processes.
LINNHOFF, B. (1993) Trans IChemE 71, Part A, 503. Pinch Analysis a state-of-the-art overview.
MASSO,A. H.and RUDD, D. F. (1969) AIChEJl 15, 10. The synthesis of system design: heuristic structures.
MEILI, A. (1990) Chem. Eng. Prog. 86(6) 60. Heat pumps for distillation columns.
MILES, F. D. (1961) Nitric Acid Manufacture and Uses (Oxford U.P.)
MILLER, R. (1968) Chem. Eng., NY 75 (May 20th) 130. Process energy systems.
MOSER,F.and SCHNITZER, H. (1985) Heat Pumps in Industry (Elsevier).
NISHIDA,N., LIU,Y. A. and LAPIDUS, L. (1977) AIChEJl 23, 77. Studies in chemical process design and
synthesis.
PERRY, R.H.and CHILTON, C. H. (eds) (1973) Chemical Engineers Handbook, 5th edn (McGraw-Hill).
PERRY,R. H. and GREEN, D. W. (eds) (1984) Perry’s Chemical Engineers Handbook, 6th edn (McGraw-Hill).
PORTON,J. W. and DONALDSON, R. A. B. (1974) Chem. Eng. Sci. 29, 2375. A fast method for the synthesis of
optimal heat exchanger networks.
REAY,D. A. and MACMICHAEL, D. B. A. (1988) Heat Pumps: Design and Application, 2nd edn (Pergamon
Press).
SANTOLERI, J. J. (1973) Chem. Eng. Prog. 69 (Jan.) 69. Chlorinated hydrocarbon waste disposal and recovery
systems.
SIIROLA, J. J. (1974) AIChE 76th National Meeting, Tulsa, Oklahoma. Studies of heat exchanger network
synthesis.
SINGH, J. (1985) Heat Transfer Fluids and Systems for Process and Energy Applications, Marcel Dekker.
STERBACEK,Z., BISKUP,B. and TAUSK, P. (1979) Calculation of Properties Using Corresponding-state Methods
(Elsevier).
SHULTZ, J. M. (1962) Trans. ASME 84 (Journal of Engineering for Power) (Jan.) 69, (April) 222 (in two parts).
The polytropic analysis of centrifugal compressors.
SMITH, R. (1995) Chemical Process Design (McGraw-Hill)
TOWNSEND, D.W.and LINNHOFF, B. (1983) AIChEJl 29, 742. Heat and power networks in processes design.
TOWNSEND,D. W. and LINNHOFF, B. (1982) Chem. Engr., London, No. 378 (March) 91. Designing total energy
systems by systematic methods.

3.19. NOMENCLATURE
Dimensions
in MLTq
2 2 1
a Constant in specific heat equation (equation 3.13) L T q
2 2 2
b Constant in specific heat equation (equation 3.13) L T q
2 2 1
CP Stream heat capacity ML T q
2 2 1
C p Specific heat at constant pressure L T q
2 2 1
Specific heat component a L T q
C p a
2 2 1
Specific heat component b L T q
C p b
2 2 1
Specific heat component c L T q
C p c
2 2 1
Mean specific heat L T q
C p m
2 2 1
Specific heat first phase L T q
C p 1