Page 82 - Data Architecture

Chapter 1.7: A Brief History of Data
sequence of the cards. And once a card was punched, it was next to impossible to make a
change to the card (although in theory it could be done).

Another shortcoming was that a relatively small amount of data could be held in this
media.

Fig. 1.7.1 depicts the media of cards and paper tape.

Fig. 1.7.1 Punched cards and paper tape.

Magnetic Tapes

Quickly replacing paper tape and punched cards was the magnetic tape. The magnetic
tape was an improvement over the paper tape and punched cards. With a magnetic tape,

a much larger volume of data could be stored. And the record size that could be stored on
a magnetic tape was variable. (Previously, the record size stored on a punched card was
fixed.) So, there were some important improvements made by magnetic tape.

But there were limitations that came with magnetic tapes. One limitation was that the
magnetic tape file had to be accessed sequentially. This meant that the analyst had to
sequentially search through the entire file when looking for a single record. Another
limitation of the magnetic tape file was that over time, the oxide on the tape stripped
away. And once the oxide was gone, the data on the tape were irretrievable.

Despite the limitations of the magnetic tape file, the magnetic tape file was an
improvement over punched cards and paper tape.

Fig. 1.7.2 shows a magnetic tape file.
82