Page 323 - Distributed model predictive control for plant-wide systems

References 297

[99] M. Moradzadeh, R. Boel, and L. Vandevelde, “Voltage coordination in multi-area power systems via distributed
model predictive control,” IEEE Transactions on Power Systems, vol. 28, pp. 1–9, 2012.
[100] R. Scattolini, “Architectures for distributed and hierarchical model predictive control – A review,” Journal of
Process Control, vol. 19, pp. 723–731, 2009.
[101] M. R. Katebi and M. A. Johnson, “Predictive control design for large-scale systems,” Automatica, vol. 33,
pp. 421–425, 1997.
[102] A. Mukhopadhyay and S. Sikdar, “Implementation of an on-line run-out table model in a hot strip mill,” Journal
of Materials Processing Technology, vol. 169, pp. 164–172, 2005.
[103] S. Guan, X. Wang, and T. Chai, “An expert controller for the laminar cooling process of hot rolled slab,”
presented at the Proceedings of the American Control Conference, vol. 4, June 24–26, Philadelphia, PA, 1998,
pp. 2165–2169.
[104] Y. Zheng, S. Li, and X. Wang, “An approach to model building for accelerated cooling process using
instance-based learning,” Expert Systems with Applications, vol. 37, pp. 5364–5371, 2010.
[105] Z. J. Wang, Q. D. Wu, and T. Y. Chai, “Optimal-setting control for complicated industrial processes and its
application study,” Control Engineering Practice, vol. 12, pp. 65–74, 2004.
[106] P. Zhou, T. Chai, and H. Wang, “Intelligent optimal-setting control for grinding circuits of mineral processing
process,” IEEE Transactions on Automation Science and Engineering, vol. 6, pp. 730–743, 2009.
[107] L. Tang, X. Wang, and J. Liu, “Color-coating production scheduling for coils in inventory in steel industry,”
IEEE Transactions on Automation Science and Engineering, vol. 5, pp. 544–549, 2008.
[108] N. Jin, S. Zhou, T.-S. Chang, and H. Hsun-Hau Huang, “Identification of influential functional process variables
for surface quality control in hot rolling processes,” IEEE Transactions on Automation Science and Engineer-
ing, vol. 5, pp. 557–562, 2008.
[109] Z. Wang, Q. Wu, and T. Chai, “Optimal-setting control for complicated industrial processes and its application
study,” Control Engineering Practice, vol. 12, pp. 65–74, 2004.
[110] H. S. Ko, J.-S. Kim, T.-W. Yoon, M. Lim, D. R. Yang, and I. S. Jun, “Modeling and predictive control of
a reheating furnace,” in Proceedings of the American Control Conference, vol. 4, June 28–30, Chicago, IL,
2000, pp. 2725–2729.
[111] H. Fang and Z. Lin, “Stability analysis for linear systems under state constraints,” IEEE Transactions on Auto-
matic Control, vol. 49, pp. 950–955, 2004.
[112] T. Hu and Z. Lin, Control Systems with Actuator Saturation: Analysis and Design, Berlin: Springer, 2001.
[113] J. B. Rawlings and K. R. Muske, “The stability of constrained receding horizon control,” IEEE Transactions
on Automatic Control, vol. 38, pp. 1512–1516, 1993.
[114] Y. Zheng, S. Li, and H. Qiu, “Networked coordination-based distributed model predictive control for large-scale
system,” IEEE Transactions on Control Systems Technology, vol. 21, pp. 991–998, 2013.
[115] P. Mhaskar, N. H. El-Farra, and P. D. Christofides, “Predictive control of switched nonlinear systems with
scheduled mode transitions,” IEEE Transactions on Automatic Control, vol. 50, pp. 1670–1680, 2005.
[116] D. Wu and Z. Li, “Effect of thermomechanical controlled processing on the microstructure and mechanical
properties of Fe-C-Mn-Si multiphase steels,” ISIJ International, vol. 46, pp. 1059–1066, 2006.
[117] Q.-Y. Sha, G.-Y. Li, L.-F. Qiao, and P.-Y. Yan, “Effect of cooling rate and coiling temperature on precipitate
in ferrite of a Nb–V–Ti microalloyed strip steel,” International Journal of Iron and Steel Research, vol. 14,
pp. 316–319, 2007.
[118] J. Wang, G.-D. Wang, and X.-H. Liu, “Hot strip laminar cooling control model,” International Journal of Iron
and Steel Research, vol. 11, pp. 13–17, 2004.
[119] B. Han, Z.-P. Zhang, X.-H. Liu, and G.-D. Wang, “Element tracking strategies for hot strip laminar cooling
control,” International Journal of Iron and Steel Research, vol. 12, pp. 18–21, 2005.
[120] G. Dian-Yao, X. Jian-Zhong, P. Liang-Gui, W. Guo-Dong, and L. Xiang-Hua, “Self-learning and its applica-
tion to laminar cooling model of hot rolled strip,” International Journal of Iron and Steel Research, vol. 14,
pp. 11–14, 2007.
[121] H. Xie, Z. Jiang, X. Liu, G. Wang, A. Tieu, M. Yang, and K. Manabe, “Application of fuzzy control of laminar
cooling for hot rolled strip,” Journal of Materials Processing Technology, vol. 187, pp. 715–719, 2007.
[122] E. Camponogara and M. L. de Lima, “Distributed optimization for MPC of linear networks with uncertain
dynamics,” IEEE Transactions on Automatic Control, vol. 57, pp. 804–809, 2012.
[123] H. F. Scherer, M. Pasamontes, J. L. Guzmán, J. D. Álvarez, E. Camponogara, and J. E. Normey-Rico, “Efficient
building energy management using distributed model predictive control,” Journal of Process Control, vol. 24,
pp. 740–749, 2014.
[124] A. N. Venkat, “Distributed model predictive control: theory and applications,” Citeseer, 2006.