Page 706 - Dust Explosions in the Process Industries

Research and Development 673

Shevchuk, V. G., R. K. Eckhoff, and A. Zolotko. (2001) “Instability and Wave Combustion Regimes
of Dust Flames.” Proceedings of the Third International Seminar on Fire and Explosion Hazards,
April 2000, Windermere, UK, pp. 591-598. Published by the Centre for Research in Fire and
Explosion Studies, University of Central Lancashire, Preston, UK.
Shi, J. Y., W. Y. Zhu, and S. Radandt. (2001) “A Further Chaotic Study on Dust-Dispersion-Induced
Turbulence in Different Vessels.” VDI-Berichte [VDI-Verlag GmbH, Diisseldorf, Germany] 1601,
pp. 703-715.
Shirolikar, J. S., C. E M. Coimbra, and M. Queiroz McQuay. (1996) “FundamentalAspects of Modelling
Turbulent Particle Dispersion in Dilute Flows.” Progress in Energy and Combustion Science 22,
pp. 363-399.
Sichel, M., and C. W. Kauffman. (April 1994) “Transition from Deflagrationto Detonation in Layered
Dust Explosions.” Proceedings of the 28th American Institution of Chemical Engineers Annual
Loss Prevention Symposium. Session No. 13 on Dust Explosions, Atlanta. New York: American
Institution of Chemical Engineers.
Siwek, R. (February 1992) “The Combination of Explosion Venting and Explosion Suppression:
Explosion Suppression in Very Small Volumes.” Proceedings of the First World Seminar on the
Explosion Phenomenon and on the Application of Explosion Protection Techniques in Practice.
Arranged by EwopEx, Brussels.
Siweli, R. (August/September 1994) “Latest Development in Explosion Protection Technology.”
Proceedings of the Sixth International Colloquium on Dust Explosions, ed. Deng Xufan and
Piotr Wolanski, Shenyang, Peoples Republic of China, pp. 35-60.
Siwek, R. (1996a) “Determination of Technical Safety Indices and Factors Influencing Hazard
Evaluation of Dusts.” Special issue on dust explosions, ed. by P. R. Amyotte. JoiirnaE ofEoss
Prevention in the Process Industry 9, pp. 21-31.
Siwek, R. (1996b) “Explosion Venting Technology.” Special issue on dust explosions, ed. by P. R.
Amyotte. Journal of Loss Prevention in the PTocess Industqi 9, pp. 81-90.
Siwek, R. (March 1996c) “A Review of Explosion Isolating Techniques.” Proceedings of the Second
World Seminar on the Explosion Phenomenon and on the Application of Explosion Protection
Techniques in Practice, Ghent, Belgium. Kontich, Belgium: EuropEx.
Siwek, R. (March 1996d)“Gas and Dust Explosion Pressure Venting and the New VDI 3673 Directive.”
Proceedings of the Second World Seminar on the Explosion Phenomenon and on the Application
of Explosion Protection Techniques in Practice, Ghent, Belgium. Kontich, Belgium: EuropEx.
Siwek. R.(May 1998) “New Findings on Explosion Venting.” Proceedings of the Ninth International
Symposium on Loss Prevention and Safety Promotion in the Process Industry, Barcelona, Spain,
pp. 580-589.
Siwek. R. (February 1999) “Optimized Explosion Protection on Fluidized Bed Units.” Proceedings
of the Third World Seminar on the Explosion Phenomenon and on the Application of Explosion
Protection Techniques in Practice, Ghent, Belgium. Ghent: Flanders Expo.
Siwek, R. (2000) “Explosionsschutz an Zerstaubungstrocknern.” Gefahrstoffe-Reinhalt.Luft 60,
pp. 95-99.
Siwek, R. (2001) “VDI-Richtlinien: Wirbelschichtanlagen.”VDI 2263, Blatt 5, und Dmckentlastung.
VDI 3673, Blatt 1. VDZ-Berichte [VDI-Verlag GmbH, Diisseldorf, Germany] 1601. pp. 135-149.
Siwek, R., and C Cesana. (April 1994) “Ignition Behaviour of Combustible Dusts.” Proceedings
of the 28th American Institution of Chemical Engineers Annual Loss Prevention Symposium.
Session No. 12 on Electrostatic Hazards, Atlanta. New York: American Institution of Chemical
Engineers.
Siwek, R., and C. Cesana. (2001) “Software for explosion protection ‘Winvent’ and ‘ExTools’.” VDZ-
Berichte [VDI-’Verlag GmbH, Diisseldorf, Germany] 1601, pp. 689-702.
Siwek, R., and P. E. Moore. (1995) “Extended Design Practice for Explosion Suppression Systems.”
In LossPreventionand Safety Promotion in the Process Industries,vol. 1,ed. J. J. Mewis, H. J. Pasma?,
and E. E. De Rademaeker. Amsterdam: Elsevier, pp. 539-550.