Page 709 - Dust Explosions in the Process Industries

676 Dust Explosions in the Process Industries

Tyldesley,A. (1993) “‘Dust Expert’-Much More than Just a Programme for Running the Vent Size
Calculations.” European Summer School on Dust Explosion Hazards: Their Assessment and Control,
Cambridge, UK. Organized by IBC Technical Services Ltd., London, in association with BMHB
and IELG.
Unruh, M. (2001) “Baumusterprtifung: Ein Produkt-mehrere harmonsierte europaische Normen.”
VDZ-Berichte[VDI-Verlag GmbH, Diisseldorf, Germany] 1601, pp. 165-172.
Ural, E. A. (1992) “Dust Entrainability and Its Effects on Explosion Propagation in Elongated
Structures.” Plant/Operations Progress.
Ural, E. A. (1993) “A Simplified Method for Predicting the Effect of Ducts Connected to Explosion
Vents.” Journal of Loss Prevention in the Process Industry 6, pp. 3-10.
Ural, E. A. (2001) “A SimplifiedDevelopment of a Unified Dust Explosion Vent SizingFormula.” Paper
1F Presented at the American Institute of Chemical Engineers 35th Annual Loss Prevention
Symposium, Houston, TX, April 2001.
Uth, H.-J. (2001) “Gefahren durch Staubexplosionen-Aspekte aus der neuen Storfall-Verordnung.”
VDZ-Berichte[VDI-Verlag GmbH, Diisseldorf, Germany] 1601, pp. 63-73.
Vadera, S., F. Meziane, and M.-L. L. Huang. (2001) “Experience with Mural in Formalizing Dust-
Expert.” Information and Software Technology 43, pp. 231-240.
Vance, W. E., X. D. Chen, and S. C. Scott. (1996) “The Rate of TemperatureRise of a Sub-Bituminous
Coal during Spontaneous Combustion in an Adiabatic Device: The Effect of Moisture Content and
Drying Methods.” Combustionand Flame 106, pp. 261-270.
Ven, A. van de, H. Olivier, and H. Gronig. (June 1996) “Dynamic Structural Response of a Dust
Detonation Tube.” Proceedings of the Seventh International Colloquiumon Dust Explosions,Bergen,
Norway. Bergen: GexCon AS (previously CMR).
Verein deutscher Ingenieure. (1992) “Pressure Release of Dust Explosions.” Draft revised guideline.
Dusseldorf, Germany: VDI.
Verein deutscher Ingenieure. (2000) Druckentlastung von Staubexplosionen. VDI-Richtlinie 3673,
Entwurf, Verein deutscher Ingenieure. Dusseldorf, Germany: VDI-Verlag GmbH.
Veyssikre, B. (1992) “Development and PropagationRegimes of Dust Explosions.” Powder Technology
71, pp. 171-180.
Veyssi&re,B., P. Arfi, and B. A. Khasainov. (1999) “Detonations of Starch Suspensions in Gaseous 02/
N2 and Stoichiometric H2/02Mixtures.” Combustionand Flame 117,pp. 477-492.
Vogl, A. (AugusVSeptember 1994) “The Course of Dust Explosions in Pipes of Pneumatic Systems.”
Proceedings of the Sixth International Colloquium on Dust Explosions, ed. Deng Xufan and Piotr
Wolanski, Shenyang, Peoples Republic of China, pp. 535-552.
Vogl, A. (1996) “Explosionsubertragungaus Behdtern in Rohrleitungenpneumatischer Anlagen.” VDZ-
Berichte [VDI-Verlag GmbH, Dusseldorf, Germany] 1272, pp. 215-236.
Vogl, A., and S. Radandt. (2001) “Explosionsiibertragungdurch dunne Rohrleitungen.” VDZ-Berichte
[VDI-Verlag GmbH, Dusseldorf, Germany] 1601, pp. 575-594.
Vogl, A., and S. Radandt. (2002) “Explosionsubertragung durch dunne Rohrleitungen.” Report
F-05-9903. Mannheim, Germany: Forschungsgesellshaft fur angewandte Systemsicherheit und
Arbeitsmedizin.
Wach, J. (April 1993) “Expert System for Designing Protection Measures against Accidental Dust
Explosions.” Proceedingsof the Fifth InternationalColloquiumon Dust Explosions,Pultusk, Poland,
pp. 497-502.
Wagner, K. (March 1994) “A Case Study of Applied Risk Analysis in Dust Explosion Hazardous
Environments.” Seminar on Explosion Safety and Related Risk Contro, Ghent, Belgium. Organized
by Technological Institute-KVIV, in cooperation with EuropEx (Kontich, Belgium), pp. 155-167.
Walther, D. C., A. C. Fernandez-Pello, and D. Urban. (1999) “Space Shuttle Based Microgravity
Smoldering Combustion Experiments.” Combustion and Flame 116, pp. 398414.
Wang B., and J. Zhang. (AugusVSeptember1994)“Investigation on the Process of TNT Dust Explosion
and Explosion Vent Systems of TNT Production Process.” Proceedings of the Sixth International