Page 708 - Dust Explosions in the Process Industries

Research and Development 675

Tamanini, E (June 1995b) “An Improved Correlation of Experimental Data on the Effects of Ducts
in Vented Dust Explosions.” Proceedings of the Eighth International Symposium on Loss Prevention
and Safety Promotion in the Process Industry, Antwerp, pp. 243-253.
Tamanini, E (1996a) “Vent Sizing in Partial-VolumeDeflagrations and Its Application to the Case of
Spray Dryers.” Journal ofLoss Prevention in the Process Industry 9, pp. 339-350.
Tamanini, F. (June 1996b) “The Role of Turbulence in Dust Explosions.” Proceedings of the Seventh
International Colloquium on Dust Explosions, Bergen, Norway. Bergen: GexCon AS (previously
CMR).
Tamanini. E (1996~)“Modelling of Panel Inertia Effects in Vented Dust Explosions.” Process Safely
Progress 15, pp~247-257.
Tamanini, E (1998a) “The Role of Turbulence in Dust Explosions.” Journal qfLoss Prevention in the
Process Industry 11, pp. 1-10.
Tamanini, E (1998b) “The Use of Models in the Development of Explosion Protection Guidelines.”
Proceedings of the Ninth International Symposium on Loss Prevention and Safety Promotion in the
Process Industry, pp. 1057-1066.
Tamanini, E (2001) “Scaling Parameters for Vented Gas and Dust Explosions.” Journal of Loss
Prevention in the Process Industry 14, pp. 455461.
Tamanini, E (2002) “Dust Explosion Vent Sizing. Current Methods and Future Developments.”
Proceedings of the Fourth International Symposium on Hazards, Prevention and Mitigation of
Industrial Explosions, Bourges, France, ed. I. Sochet. Journal of Physics IVFrance 12, pp. 31-44.
Tamanini, E, and E.A. Ural. (1992) “FMRC Studies of Parameters Affecting the Propagation of Dust
Explosions.” Powder Technology 71, pp. 135-151.
Tamanini,E, and J. V. Valiulis. (1996) “Improved guidelines for the sizing of vents in dust explosions.”
Special issue on dust explosions. ed. P. R. Amyotte. Journal of Loss Prevention in the Process
Industry 9, pp. 105-118.
Tamanini, E, and J. V. Valiulis. (September 1998) “ACorrelation for the Impulse Produced by Vented
Explosions.” Proceedings of the Eighth International Colloquium on Dust Explosions, Schaumburg,
IL. Schaumburg: Safety Consulting Engineers, pp. 305-333.
Tamanini, E, and Y.V. Valiulis. (January 1998a) “Dust explosion vent sizing technology implemented
by Factory Mutual loss preventionconsultantsworldwide.” First Internet Conferenceon Process Safety.
Tamanini, E, and J. V. Valiulis. (2000) “A Correlationfor the Impulse Producedby Vented Explosions.”
Special issue on dust explosions, ed. P. R. Amyotte and K. L. Cashdollar.Journal ofLoss Prevention
in the Process Industry 13, pp. 277-289.
Tao, H. (2002) “Shock Wave Ignition of Aluminum Particles.” Proceedings of the Fourth International
Symposium on Hazards, Prevention and Mitigation of Industrial Explosions, Bourges, France,
ed. I. Sochet. journal of Physics IVFrance 12, pp. 105-112.
Tian, R., C. He, and Y. Zhang. (August 1994) “Effect of Different Ignition Energies and the Existence
of Methane Gas on the Minimum Explosive Concentration of Coal Dusts.” Proceedings of the Sixth
International Colloquium on Dust Explosions, ed. Deng Xufan and Piotr Wolanski, Shenyang,
Peoples Republnc of China, pp. 227-236.
Tse, S. D., R. A. Anthenien, A. C. Fernandez-Pello, et al. (1999) “An Application of Ultrasonic
Toniographic Imaging to Study Smoldering Combustion.” Combustion and Flame 116,pp. 120-135.
Tulis, A. J., W. K. Sumida, D. C. Heberlein, et al. (April 1993) “Detonation Tube Studies of Particle
Size and RDX Sensitization of Aluminium Powder-Air with Regard to Spinning and/or Multiple-
Front Detonations.” Proceedings of the Fifth International Colloquium on Dust Explosions. Pultusk,
Poland, pp. 391400.
Tulis, A. J., W. K. Sumida, and R. J. Dihu. (June 1996) “Multiple Fronts in Dust Detonations.”
Proceedings of the Seventh International Colloquium on Dust Explosions, Bergen, Norway. Bergen:
GexCon AS (previously CMR).
Tuomisaari, M., D. Baroudi, and R. Latva. (1998) Extinguishing Smouldering Fires in Silos. VTT
Publications 339. Espoo, Finland: Technical Research Centre of Finland (VTT).