Page 35 - Electrical Installation in Hazardous Area

14 Electrical installations in hazardous areas

1 Certiflcade of Conformity
2 BAS No. Ex %1)9999
3 This certiticate is issued for the electrical apparatus: I
CONTROL CONSOLE TYPE ABC.123
4 Manufactured and submitted for dation by:
A. MANUFACTURERLTD
of 123 Fore Street, Buxton, SK17 9JK
5 This electrical apparatus and any acceptable variation thereto is specified in the Schedule to this
Certificate and the docnments therein referred do.
6 BASEEFA being an Approved Certification Body in accordance with Article 14 of the cooncil Directive
Of~EurOpean- ' 'cs of 18 Decemk 1975 (76/117/EEC) certifies that the appamus has baen
found to comply with harmonised European Standards:
EN50014 (1977) + Amd 1 to 5
EN50018 (1977) + Amd 1 to 3
and has suaessfully met the examination and test requirements recorded in confidential Repoa number:
%(C)9999 dated 27 FebmnrJll9%
7 The apparatus marking shall include the code:
EEr d IIB T4 8
8 The manufaclurer of the electrical apparatus rdd to in this &ate, hac the responsibility to
ensure. that the apparatus conforms to the specifcation laid down in the Schedule to this certificate and
has satisfied routine verifications and tests specified thcrcin.
9 This appamus may be marked with the Distinctive Community Mark specified in Annex I1 to the
Council Didve of 16 January 1984 (Doc 84/47/EEC). A facsimile ofthis mark is printed on sheet 1 of
this cerWtcate.
File No: EECS 9999/01/001
Sheet 1 of2

Fig. 1.5 Example of equipment certificate