Page 216 - Energy from Toxic Organic Waste for Heat and Power Generation

194 Energy from Toxic Organic Waste for Heat and Power Generation

[26] Malik A, Mohapatra SK. Biomass-based gasifiers for internal combustion (IC) en-
gines—a review. Sadhana 2013;38(3):461–76.
[27] Sombatwong P, Thaiyasuit P, Pianthong K. Effect of pilot fuel quantity on the per-
formance and emission of a dual producer gas diesel engine. Energy Procedia
2013;34:218–27. https://doi.org/10.1016/j.egypro.2013.06.750.
[28] Teresa D, Tornese F, Laforgia D. Computer-aided conversion of an engine from diesel
to methane. Appl Energy 2013;108:8–23.
[29] Teresa D, Carlucci AP, Strafella L, Laforgia D. In: Experimental validation of a CFD
model and an optimization procedure for dual fuel engines. Society of automotive
engineers; 2014. Paper No: 2014-01-1314.
[30] Mamilla V, Mallikarjun MV, Lakshmi Narayana Rao G. Effect of combustion cham-
ber design on a DI diesel engine fuelled with jatropha methyl esters blend with die-
sel. International conference on design and manufacturing, (IConDM), Procedia Eng
2013;64:479–90.
[31] Ellis MR. Effect of piston bowl geometry on combustion and emissions of a direct
injected diesel engine (Ph.D. thesis). Brunel University School of Engineering and
Design; 1999. p.1–299.
[32] De Risi A. In: Optimization of the combustion chamber of direct injection diesel en-
gines. Society of automotive engineers, Lecce, Italy; 2003. Paper No: 2003-01-1064.
[33] Shi Y, Reitz RD. Optimization study of the effects of bowl geometry, spray targeting
and swirl ratio for a heavy-duty diesel engine operated at low and high load. Int J En-
gine Res 2008;9:325–46.
[34] Bianchi G, Pelloni P, Corcione F, Mattarelli E. In: Numerical study of the combustion
chamber shape for common rail H.S.D.I. diesel engines. Society of automotive engi-
neers; 2000. https://doi.org/10.4271/2000-01-1179. Paper No: 2000-01-1179.
[35] Mobasheri R, Peng Z. In: Analysis of the effect of re-entrant combustion chamber
geometry on combustion process and emission formation in a HSDI diesel engine.
Society of automotive engineers; 2012. Paper No: 2012-01-0144.
[36] Ravindranath NH, Somashekar HI, Dasappa S, Jayasheela Reddy CN. Sustainable bio-
mass power for rural India–case study of biomass gasifier for village electrification. Curr
Sci 2004;87(7):932–41.
[37] Ravindranath NH, Balachandra P. Sustainable bioenergy for India: technical, economic
and policy analysis. Energy 2009;34:1003–13.
[38] Nouni MR, Mullick SC, Kandpal TC. Biomass gasifier projects for decentralized pow-
er supply in India: a financial evaluation. Energy Policy 2007;35:1373–85.
[39] Rangan B. Comparison of options for distributed generation in India. Energy Policy
2006;34:101–11.
[40] Sridhar G, Sridhar HV, Dasappa S, Paul PJ, Rajan NKS, Mukunda HS. Development of
producer gas engines. Proc IMechE D J Automob Eng 2005;219:423–38.
[41] Anil TR, Ravi SD, Shashikanth M, Rajan NKS, Tewari PG. In: CFD analysis of a mix-
ture flow in a producer gas carburetor. International conference on computational flu-
id dynamics, acoustics, heat transfer and electro-magnetics (CFEMATCON-06). July
24–25, 2006. Visakhapatnam: Andhra University; 2006.