Page 380 - Engineered Interfaces in Fiber Reinforced Composites

Chapter 8. Improvement of interlaminar fracture toughness ivith interface control 361

Chan W.S. ( 1986). Delamination arrester-an adhesive inner layer in laminated composites. In Composite,
Materia1.r Fatigue and Fracture, ASTM STP 907 (H.T. Hahn ed.). pp, 17&196.
Chan, W.S. (1991). Design approaches for edge delamination resistance in laminated composites. J.
Composites Technol. Res. 14, 9 1-96.
Chan W.S.. Rogers C. and Aker S. (1986). Improvement of edge delamination strength of composite
laminates using adhesive layers. In Coniposite Materials: Testing and Design, ASTM STP 893 (J.M.
Whitney ed.). ASTM, Philadelphia, PA, 266285.
Chan, W.S. and Ochoa, 0.0. (1989). Edge delamination resistance by a critical ply termination. Key Eng.
Mater. 31. 285-304.
Chen, S.F. and Jang, B.Z. (1991). Fracture behavior of interlaminar fiber-resin composites. Composites
Sci. Technol. 41. 77-97.
Chou, T.W. (I 992). Three dimensional textile composites. In Microstructural Design of Fiber Composire.s.
Cambridge LJniversity press, Cambridge, Chapter 7, pp. 374442.
Chou, T.W.. McCullough, R.L. and Pipes, R.B. (1986). Composites. Sci. Am. 252, 192-203.
Chung. W.C., Jang, B.Z., Chang, T.C., Hwang, L.R. and Wilcox, R.C. (1989). Fracture behaviour in
stitched multidirectional composites. Mater. Sci. Eng. AlIZ, 157-173.
Daghyani, H.R., Ye, L. and Mai, Y.W. (1995a). Mode I fracture behaviour of adhesive joints. I.
Relationship between fracture energy and bond thickness. J. Adhesion 53, 149-162.
Daghyani. H.R., Ye, L. and Mai, Y.W. (1995b). Mode I fracture behaviour of adhesive joints. 2. Stress
analysis of constraint parameters. J. Adhesion 53, 163-1 72.
Daghyani, H.R.. Ye, L. and Mai, Y.W. (1996). Mixed mode fracture of adhesively bonded carbon fiber!
cpoxy composite joints. J. Composite Muter. 30, 1248-1265.
Daniel, I.M., Rowlands, R.E. and Whiteside. J.B. (1974). Effects of material and stacking sequence on
behavior of composite plates with holes. E.xprr. Mech. 14, 1-9.
Dransfield, K.. Baillie, C. and Mai, Y.W. (1994). Improving the delamination resistance of CFRP by
stitching - a review. Composites Sci. Technol. SO, 305-317.
Drzal, L.T. (1990). The effect of polymeric matrix mechanical properties on the fiber-matrix interfacial
shear strength. Mater. Sci. Eng. A126, 289-293.
Drzal. L.T. and Madhukar, M. (1991). Fiber-matrix adhesion and its relationship to composite
mechanical properties. J. Mater. Sci. 28, 569-610.
Du. G.W.. Chou, T.W. and Popper, P. (1991). Analysis of three-dimensional textile preform for
multidirectional reinforcement of composites. J. Mater. Sci. 26, 3438-3448.
Evans, R.E. and Masters, J.E. (1987). A new generation of epoxy composites for primary structural
applications: materials and mechanics. In Toughened Composites, ASTM STP 937 (N.J. Johnston ed.).
ASTM. Philadelphia, PA, pp 413436.
Farley, G.L. (I 992). A mechanisms rcsponsible for reducing compressive strength of through-thc-
thickness reinforced composite materials. J. Composite Mater. 26, 1784-1 795.
Farley. G.L. and Dickinson, L.C. (1992). Removal of surface loop from stitched composites can improve
compression and compression-after-impact strengths. J. Reinforced Plast. Composites 11, 633-642.
Farley, G.L., Smith, B.T. and Maiden, J. (1992). Compression response of thick layer composite
laminates with through-the-thickness reinforcement. J. Reinforced Plast. Composites 11, 787-8 10.
Furrow, K.W., Loos, A.C. and Cano, R.J. (1996). Environmental effects on stitched RTM textile
composites. J. Reinforced Plast. Composites 15, 378419.
Garg. A.C. and Mai, Y.W. (1988a). Failure mechanisms in toughened epoxy resin - A review. Composites
Sci. Technol. 31, 179-223.
Garg, A.C. and Mai, Y.W. (1988b). Failure prediction in toughened epoxy resins. Composites Sci.
Technol. 31. 225-242.
Guenon, V.A.. Chou, T.W. and Gillespie, J.W. (1987). Interlaminar fracture toughness of a three-
dimensional fabric composites. in Proc. of the Society of Manqfacruring Engineers. EM87-55 I. Society
of Manufacturing Engineers, Dearborn, MI. pp. I- 17.
Hcrakovich. C.T. (1 98 I). On the relationship between engineering properties and delamination of
composite materials. J. Cotnposite Mater. 15, 336-348.