Page 383 - Engineered Interfaces in Fiber Reinforced Composites

364 Engineered interfaces in $her reinforced composites

McGarry, F.J. (1969). The fracture of polymers and fiber reinforced polymer composites. In Proc. AIAA/
ASME 10th Structures, Structural Dynamics & Mater. Conf., New Orleans, pp. 45M71.
Mignery L.A., Tan T.M. and Sun C.T. (1985). The use of stitching to suppress delamination in laminated
composites. In Delamination and Debonding, ASTM STP 876 (W.S. Johnson ed.), ASTM,
Philadelphia, PA, 371-385.
Morales, A. (1990). Structural stitching of textile preforms. In Proc. 22nd. Int. SAMPE Tech. Conf
pp. 1217-1230.
Mouritz, A.P. (1995). The damage to underwater GRP laminates by underwater explosion shock loading.
Composites Sci. Technol. 55, 365-374.
Mouritz, A.P. (1996). Flexural properties of stitched GRP laminates. Composites Sci. Technol. 56, 525-
530.
Mouritz, A.P. (1997). Unpublished discussion, Workshop on Stitched Composite Laminates, Sydney
University, Sydney.
Norman, T.L. and Sun, C.T. (1991). Mechanical properties and interlaminar toughness of cross-plied
laminates containing adhesive strips. AIAA J. 29, 247-252.
O’Brien, T.K. (1983). Mixed mode strain energy release rate effects on edge delamination of composites,
NASA TR-84592.
OBrien, T.K. (1984). Effects of Defects in Composite Muteriuls. ASTM STP 836, ASTM, Philadelphia,
PA, pp. 125-142.
Ogo, Y. (1987). The effect of stitching on in-plane interlaminar properties of carbon-epoxy fabric
laminates, M.S. Thesis, University of Delaware, Delaware, USA.
Pagano, N.J. and Pipes, R.B. (1971). The influence of stacking sequence on laminate strength. J.
Composite Mater. 5, 50-57.
Pagano, N.J. and Pipes, R.B. (1973). Somc observations on thc interlaminar strength of composite
laminates. Int. J. Mech. Sci. 15, 679-688.
Pagano, N.J. and Soni, S.R. (1983). Global-local laminate variational model. Int. J. Solids Struc. 19,207-
228.
Pipes, R.B. and Pagano, N.J. (1970). Interlaminar stresses in composite laminates under uniform axial
extension. J. Composite Mater. 4, 538-548.
Poon, C., Benak, T. and Could, R. (1990). Assessment of impact damage in toughened resin composites.
Theor. Appl. Fract. Mech. 13, 81-97.
Potanova, M.A., Poc, C.C., Whitecomb, J.D. (1992). Open hole and post-impact compressive fatigue of
stitched and unstitched carbon fibe-epoxy matrix composites. In Composite Marerials: Testing and
Design (10th Volume), ASTM STF-1120 (G.C. Grimes ed.), ASTM, Philadelphia, PA, pp. 37-53.
Rechak, S. and Sun, C.T. (1990). Optimal use of adhesive layer in reducing impact damage in composite
laminates. J. Reinforced Plasi. Composites 9, 569-582.
Recker, H.G., Altstadt, V., Eberle, W., Folda, T., Gerth, D., Heckmann, W., Ittemann, P., Tesch, H. and
Weber, T. (1990). Toughened thermosets for damage tolerance carbon fiber reinforced composites.
SAMPE J. 26, 73-78.
Reeder, J.R. (1995). Stitching vs a toughened matrix: compression strength effects. J. Composiie Mater.
29, 2464-2487.
Russell, A.J. and Street, K.N. (1987). The effect of matrix toughness on delamination: static and fatigue
fracture under mode I and I1 shear loading of graphite fiber composites. In Toughened Composites,
ASTM STP 937 (N.J. Johnston ed.), ASTM, Philadelphia, PA, pp. 257-294.
Sawyer, J.W. (1985). Effect of stitching on the strength of bonded composite singlc lap joints. AIAA J. 23,
1744-1748.
Scott J.M. and Phillips D.C. (1975). Carbon fiber composites with rubber toughened matrices. J. Mater.
Sci. 10, 551-562.
Sela N., Ishai 0. and Banks-Sills L. (1989). The effect of adhesive thickness on interlaminar fracture
toughness of interleaved CFRP specimens. Composites 20, 257-264.
Shu, D. and Mai, Y.W. (1993). Effect of stitching on interlaminar delamination extension in composite
laminates. Composites Sci. Technol. 49, 105-171.