Page 381 - Engineered Interfaces in Fiber Reinforced Composites

362 Engineered interjiaces in fiher reinforced composites
Herakovich, C.T. (1982). Influence of layer thickness on the strength of angle ply laminates. J. Composite
Muter. 16, 21 7-227.
Herszberg, I., Weller, T., Leong, K.H. and Bannister, M.K. (1996). The residual tensile strength of
stitched and unstitched carbon/epoxy laminates impacted under tensile load. In Proc. 1st Australasian
Congress on Applied Mechanics, Melbourne, pp. 309-3 14.
Hess T.E., Huang S.L. and Rubin H. (1977). Fracture control in composite materials using integral crack
arresters. J. Aircruft 14, 994-999.
Heyliger, L.A. and Reddy, J.N. (1985). Reduction of free-edge stress concentration. J. Appl. Mech. 52,
801-805.
Hibbs, M.F., Tse, M.K. & Bradley, W.L. (1987). Interlaminar fracture toughness and real time fracture
mechanisms of some toughened graphite/epoxy composite. In Toughened Composites, ASTM STP 937
(N.J. Johnston ed.), ASTM, Philadelphia, PA, pp. 115-130.
Hirschbuehler, K.R. (1987). A comparison of several mechanical tests used to evaluate the toughness of
composites. In Toughened Composites, ASTM STP 937 (N.J. Johnston ed.), ASTM, Philadelphia, PA,
pp. 61-73.
Holt, D.J. (1982). Future composite aircraft structures may be sewn together. Automotive Eng. 90,4&49.
Howard, W.E., Gossard, T. Jr. and Jones, M.R. (1986). Reinforcement of composite laminate free edges
with U-shaped caps. AIAA Paper, 89-0972.
Hsu, P.W. and Herakovich, C.T. (1977). Edge effects in angle ply Composite laminates. J. Composite
Mater. 11, 422-428.
Huang, S.L., Richey, R.J. and Deska, E.W. (1978). Cross reinforcement in a GR/EP laminate. Presented
at American Society of Mechanical Engineers Winter Annual Meeting, San Francisco.
Hunston D.L., Moulton R.J., Johnston N.J. and Bascom W.D. (1987). Matrix resin effects in composite
delamination: Mode I fracture aspects. In Toughened Composites, ASTM STP 937 (N.J. Johnston ed.),
ASTM, Philadelphia, PA, pp. 74-94.
Ishai 0.. Rosenthal H., Sela N. and Drukker E. (1988). Effect of selective adhesive interleaving on
interlaminar fracture toughness of graphitelepoxy composite laminates. Composites 19, 49-54.
Ishikawa, T., Sugimoto, S. Matsushima, M. and Hayashi, Y. (1995). Some experimental findings in
compression-after-impact (CAI) tests of CFjPEEK (APC-2) and conventional CF/Epoxy flat plates
Composites Sci. Technol. 55, 349-363.
Jain, L.K. and Mai, Y.W. (1994). On the effect of stitching on mode I delamination toughness of
laminated composites. Composites Sci. Technol. 51, 33 1-345.
Jain, L.K. and Mai, Y.W. (1995). Determination of mode I1 delamination toughness of stitched laminated
composites. Composites Sci. Technol. 55, 241-253.
Joo, J.W. and Sun, C.T. (1992). A failure criterion for laminates governed by free edge interlaminar shear
stresses. J. Composites Mater. 26, 1510-1522.
Jordan W.M. and Bradley W.L. (1987). Micromechanisms of fracture in toughened graphite-epoxy
laminates. In Toughened Composites (N.J. Johnston ed.), ASTM STP 937, ASTM, Philadelphia, PA,
pp. 95-1 14.
Jordan W.M. and Bradley W.L. (1988). The relationship between mechanical properties and mode I
delamination fracture toughness J. Mater. Sci. Lett. 7, 1362-1364.
Jordan W.M., Bradley W.L. and Moulton R.J. (1989). Relating resin mechanical properties to composite
delamination fracture toughness. J. Composite Mater. 23, 923-943.
Kang, T.J. and Lee. S.H. (1994). Effect of stitching on the mechanical and impact properties of woven
laminate composites. J. Composite Muter. 28, 1574-1587.
Kim, D.M. and Hong, C.S. (1992). A simple sublaminate approach to the design of thick composite
laminates for suppression of free-edge delamination. Composites Sci. Technol. 43, 147-1 58.
Kim, J.K. (1998). Methods for improving impact damage resistance of CFRPs. Key Eng. Mater, 141-143,
149-1 68.
Kim, J.K. & Mai, Y.W. (1991). High strength, high fracture toughness fiber composites with interface
control - A review. Composites Sci. Technol. 41, 333-378.
Kim, J.K., Baillie, C., Poh, J. and Mai, Y.W. (1992). Fracture toughness of CFRP with modified epoxy
resin matrices. Composites Sci. Technol. 43, 283-297.