Page 32 - Estimators Piping Man Hour Manual

ATTACHING FLANGES—SLEP-ON TYPE

Labor—Slipping on Flange
Manual Welding at Front and Back
Carbon Steel Material
NET MAN HOURS EACH
SERVICE PRESSURE RATING
Q- „
oize
Inches 150 Lb. 300 Lb. 400 Lb. 600 Lb. 900 Lb. 1500 Lb. 1 2500 Lb.
1
1 0.8 0.9 1.2 1.2 1.4 1.6 1.8
1!4 0.9 1.0 1.2 1.2 1.6 1.8 2.0
1% 0.9 1.1 1.2 1.2 1.6 1.8 2.0
2 1.1 1.2 1.6 1.6 2.1 2.4 2.6
2% 1.3 1.5 2.0 2.0 2.6 2.9 3.2
3 1.6 1.8 2.5 2.5 3.1 3.5 3.9
3% 1.9 2.1 2.9 2.9
4 2.1 2.3 3.0 3.3 4.2 4.7 5 2
5 2.6 2.9 3.9 4.2 5.3 5.9 6.5

6 3.1 3.4 4.5 5.1 6.3 7.1 7,8
8 4.3 4.6 6.2 6.8 8.3 9.3 10.2
10 5.3 5.8 7.6 9.4 10.6 11.9 13.1
12 6,5 7.0 9.3 11.6 13.0 14.6 16.1
HOD 7.6 8.5 11.0 13.7 15.0 16.8
16 OD 8.9 9.6 12.7 15.6 17.0 19.0
18 OD 10.3 11.4 14.8 17.9 20.1 22.5
20 OD 12.4 13.6 17.9 20.1 23,3 26.1
24 OD 15.5 17.0 21.7 26.4 29.5 33.0
26 OD - - 23.5 28.6 32.0 _
30 OD - - 27,1 33.0 36.9

34 OD - - 30.7 37.4 41.8 _
36 OD _ - 32.5 39.6 44.2 ...
_
42 OD - 37.9 46.2 -
Flanges: Man hours are for labor attaching the flange perpendicular to the centerline of a section of straight pipe or
to a straight section of pipe on the end of a bend.
Pipe Thickness: Man hours are for any wall thickness of pipe used with listed flanges.
Weld Fittings or Bends: For attaching flanges to weld fittings or bends with no straight tangents or on a straight
section of pipe, but other than perpendicular to the centerline, add 25% to the above man hours.
Refacing: For flanges requiring refacing after welding increase above man hours 50'7r.