Page 431 - Fiber Bragg Gratings

408 Chapter 8 Fiber Grating Lasers and Amplifiers

130 Desurvire E., Zirngible M., Presby H. M., and DiGiovanni D., "Dynamic gain
compensation in saturated erbium-doped fibre amplifiers," IEEE Photon
Technol. Lett. 5, 453 (1991).
131 Motoshima K, Shimizu K, Takano K, Mizuochi T., and Kitayama T., "EDFA
with dynamic gain compensation for multiwavelength transmission systems,"
OFC'94 Technical Digest, 191 (1994).
132 Zirngibl M., "Gain control in erbium-doped fibre amplifiers by an all-optical
feedback loop," Electron. Lett. 27(7), 560-561 (1991).
133 Delevaque E., Georges T., Bayon J. R, Monerie M., Niay P., and Berage, P.,
"Gain control in erbium-doped fibre amplifiers by lasing at 1480 nm with
photoinduced Bragg gratings written on the fibre ends," Electron. Lett. 29(12),
1112-1113 (1993).
134 Massicott J. R, Willson S. D., Wyatt R., Armitage J. R., Kashyap R., and
Williams D., "1480 nm pumped erbium doped fibre amplifier with all optical
automatic gain control," Electron. Lett. 30(12), 962-963 (1994).
135 Saleh A. A. M., Jopson R. M., Evankow J. D., and Aspell J., "Modeling of gain
in erbium-doped fibre amplifiers," IEEE Photon. Technol. Lett. 2(10), 714
(1990).
136 Georges T., Delevaque E., Monerie M., Lamouler P., and Bayon J. R, "Pair
induced quenching in erbium doped silicate fibers," IEEE Optical Amplifiers
and Their Applications, Technical Digest, Vol. 17, p. 71 (1992).
137 Olshansky R., "Noise figure for erbium-doped optical amplifiers," Electron.
Lett. 24(22), 1363-1365 (1988).
138 Massicott J. R, Lebre C., Wyatt R., Kashyap R., Williams D., and Yu A., "Low
noise, all-optical gain controlled Er3 + doped fibre amplifier using asymmetric
control laser cavity design," Electron. Lett. 32(9), 816-817 (1996).
139 Yu A. and O'Mahony M. J., "Properties of gain controlled erbium doped fibre
amplifiers by lasing," Electron Lett. 31(16), 1348 (1995).