Page 167 - Finite Element Modeling and Simulations with ANSYS Workbench

152 Finite Element Modeling and Simulation with ANSYS Workbench

Click on the arc as shown below and apply it to the Geometry selection in the
Details of “Pressure”. The Edge Selection filter must be turned on to allow
this selection. In the Details of “Pressure”, choose Vector for the Define By
field, and enter ‘2e6’ for Magnitude. Click on the vertical line as shown below
and click Apply to confirm on the Direction selection. Make sure the vector is
pointing downward. If not, click the left or right arrow at the bottom left corner
to toggle direction.

Step 11: Retrieve Solution
Insert a Total Deformation item by right-clicking on Solution (A6) in the Outline
tree.