Page 303 - Finite Element Modeling and Simulations with ANSYS Workbench

288 Finite Element Modeling and Simulation with ANSYS Workbench

Step 13: Retrieve Results from Modal Analysis
Insert Total Deformation by right-clicking on Solution (A6) in the Outline.
In the Details of “Total Deformation”, set Mode to 1. Insert another Total
Deformation item. In the Details of “Total Deformation 2”, set Mode to 2.
Repeat this step three more times. Set Mode to 3, 4 and 5, respectively, for each
new insertion. Right-click on Solution (A6) in the Outline and Solve.

Click on Total Deformation in the Outline to review results. The results below
show the first natural frequency of 1083.2 Hz and the corresponding mode
shape.