Page 114 - Forensic Structural Engineering Handbook

DESIGN CODES AND STANDARDS 2.19

31. Steel Construction Manual, Specification for Structural Joints Using ASTM A325 or A490 Bolts,
13th ed., American Institute of Steel Construction, Chicago, IL, 2004.
32. National Lumber Manufacturers Association, National Design Specification for Stress-Grade
Lumber and Its Fastenings, NFPA, Washington DC, 1944.
33. National Forest Products Association/American Society of Civil Engineers, Load and Resistance
Factor Specification for Engineered Wood Construction, NFPA, Washington DC, 1996.
34. D. V. Rosowsky and B. R. Ellingwood, “Stochastic Damage Accumulation and Probabilistic
Codified Design for Wood,” Johns Hopkins University Civil Engineering Report 1990-02-02,
Baltimore, MD, August 1990.
35. Recommended Practice for Engineered Brick Masonry, Brick Institute of America, McLean, VA,
1969.
36. Specification for the Design and Construction of Load-Bearing Concrete Masonry, National
Concrete Masonry Association, Herndon, VA, 1970.
37. Concrete Masonry Structures—Design and Construction, American Concrete Institute, Detroit,
MI, 1970.
38. Specifications for Concrete Masonry Construction (ACI 531.1-76), American Concrete Institute,
Detroit, MI, 1976.
39. Building Code Requirements for Concrete Masonry Structures (ACI 531-79), American Concrete
Institute, Detroit, MI, 1979.
40. Building Code Requirements and Specification for Masonry Structures, TMS 402-08/ACI 530-
08/ASCE 5-08, American Concrete Institute, Farmington Hills, MI, 2008.
41. Building Code Requirements and Specification for Masonry Structures, TMS 602-08/ACI 530.1-
08/ASCE 6-08, American Concrete Institute, Farmington Hills, MI, 2008.
42. Standard Specifications for Highway Bridges, 17th ed., American Association of State Highway
and Transportation Officials, Washington DC, 2002.
43. AASHTO LRFD Bridge Design Specifications, 4th ed., with 2008 Interim, American Association
of State Highway and Transportation Officials, Washington DC, 2007/2008.
44. AASHTO LRFD Bridge Construction Specifications, 2nd ed., with 2006, 2007, 2008, and 2009
Interims, American Association of State Highway and Transportation Officials, Washington DC,
2009.
45. R. T. Ratay, “Standards for Design Loads during Construction: An ASCE Effort,” Proceedings of
the ASCE Structures Congress ’89, San Francisco, CA, 1989, pp. 870–875.
46. J. F. Duntemann, N. S. Anderson, and A. Longinow, Synthesis of Falsework, Formwork, and
Scaffolding for Highway Bridge Structures, Report No. FHWA-RD-91-062, FHWA, U.S.
Department of Transportation, November 1991.
47. Design Loads on Structures During Construction, SEI/ASCE 37-02, American Society of Civil
Engineers, Reston, VA, 2002.
48. D. V. Rosowsky, “Load Combinations and Load Factors for Construction,” Journal of
Performance of Constructed Facilities, vol. 10, no. 4, November 1996, pp. 175–181.
49. J. F. Duntemann, L. E. Dunn, S. Gill, R. G. Lukas, and M. K. Kaler, Guide Design Specification
for Bridge Temporary Works, FHWA Report no. FHWA-RD-93-032, Federal Highway
Administration, Washington, November 1993.
50. American Association of State Highway and Transporation Officials, Guide Design Specifications
for Bridge Temporary Works, Washington DC, 1995, 89.