Page 371 - T. Anderson-Fracture Mechanics - Fundamentals and Applns.-CRC (2005)

1656_C007.fm Page 351 Monday, May 23, 2005 5:54 PM

Fracture Toughness Testing of Metals 351

11. Jones, M.H. and Brown, W.F., Jr., ‘‘The Influence of Crack Length and Thickness in Plane Strain
Fracture Toughness Testing.’’ ASTM STP 463, American Society for Testing and Materials, Philadelphia,
PA, 1970, pp. 63–101.
12. Kaufman, J.G. and Nelson, F.G., ‘‘More on Specimen Size Effects in Fracture Toughness Testing.’’
ASTM STP 559, American Society for Testing and Materials, Philadelphia, PA, 1973, pp. 74–98.
13. Wallin, K., ‘‘Critical Assessment of the Standard E 399.’’ ASTM STP 1461, American Society for
Testing and Materials, Philadelphia, PA, 2004.
14. E 561-98, ‘‘Standard Practice for R-Curve Determination.’’ American Society for Testing and Materials,
Philadelphia, PA, 1998.
15. Stricklin, L.L., ‘‘Geometry Dependence of Crack Growth Resistance Curves in Thin Sheet Aluminum
Alloys.’’ Master of Science Thesis, Texas A&M University, College Station, TX, 1988.
16. Landes, J.D., Zhou, Z., Lee, K., and Herrera, R., ‘‘Normalization Method for Developing J-R Curves
with the LMN Function.’’ Journal of Testing and Evaluation, Vol. 19, 1991, pp. 305–311.
17. Joyce, J.A. and Hackett, E.M., ‘‘Development of an Engineering Definition of the Extent of J Singularity
Controlled Crack Growth.’’ NUREG/CR-5238, U.S. Nuclear Regulatory Commission, Washington, DC, 1989.
18. E 1921-03, ‘‘Standard Test Method for Determination of Reference Temperature, T , for Ferritic Steels
o
in the Transition Range.’’ American Society for Testing and Materials, Philadelphia, PA, 2003.
19. BS 5762, Methods for Crack Opening Displacement (COD) Testing. British Standards Institution,
London, 1979.
20. E 1290-02, ‘‘Standard Test Method for Crack Tip Opening Displacement Fracture Toughness
Measurement.’’ American Society for Testing and Materials, Philadelphia, PA, 2002.
21. Duffy, J. and Shih, C.F., ‘‘Dynamic Fracture Toughness Measurements for Brittle and Ductile Materials.’’
Advances in F racture Research: Seventh International Confer ence on F racture. Pergamon Press,
Oxford, 1989, pp. 633–642.
22. Sanford, R.J. and Dally, J.W., ‘‘A General Method for Determining Mixed-Mode Stress Intensity Factors
from Isochromatic Fringe Patterns.’’ Engineering Fracture Mechanics, Vol. 11, 1979, pp. 621–633.
23. Chona, R., Irwin, G.R., and Shukla, A., ‘‘Two and Three Parameter Representation of Crack Tip Stress
Fields.’’ Journal of Strain Analysis, Vol. 17, 1982, pp. 79–86.
24. Kalthoff, J.F., Beinart, J., Winkler, S., and Klemm, W., ‘‘Experimental Analysis of Dynamic Effects
in Different Crack Arrest Test Specimens.’’ ASTM STP 711, American Society for Testing and
Materials, Philadelphia, PA, 1980, pp. 109–127.
25. Nakamura, T., Shih, C.F., and Freund, L.B., ‘‘Analysis of a Dynamically Loaded Three-Point-Bend
Ductile Fracture Specimen.’’ Engineering Fracture Mechanics, Vol. 25, 1986, pp. 323–339.
26. Nakamura, T., Shih, C.F., and Freund, L.B., ‘‘Three-Dimensional Transient Analysis of a Dynamically
Loaded Three-Point-Bend Ductile Fracture Specimen.’’ ASTM STP 995, American Society for Testing
and Materials, Philadelphia, PA, Vol. I, 1989, pp. 217–241.
27. Joyce, J.A. and Hacket, E.M., ‘‘Dynamic J-R Curve Testing of a High Strength Steel Using the
Multispecimen and Key Curve Techniques.’’ ASTM STP 905, American Society of Testing and
Materials, Philadelphia, PA, 1984, pp. 741–774.
28. Joyce, J.A. and Hacket, E.M., ‘‘An Advanced Procedure for J-R Curve Testing Using a Drop Tower.’’
ASTM STP 995, American Society for Testing and Materials, Philadelphia, PA, 1989, pp. 298–317.
29. Robertson, T.S., ‘‘Brittle Fracture of Mild Steel.’’ Engineering, Vol. 172, 1951, pp. 445–448.
30. Naus, D.J., Nanstad, R.K., Bass, B.R., Merkle, J.G., Pugh, C.E., Corwin, W.R., and Robinson, G.C., ‘‘Crack-
Arrest Behavior in SEN Wide Plates of Quenched and Tempered A 533 Grade B Steel Tested under Noniso-
thermal Conditions.’’ NUREG/CR-4930, U.S. Nuclear Regulatory Commission, Washington, DC, 1987.
31. E 1221-96, ‘‘Standard Method for Determining Plane-Strain Crack-Arrest Toughness, K , of Ferritic
Ia
Steels.’’ American Society for Testing and Materials, Philadelphia, PA, 1996 (Reapproved 2002).
32. Crosley, P.B., Fourney, W.L., Hahn, G.T., Hoagland, R.G., Irwin, G.R., and Ripling, E.J., ‘‘Final
Report on Cooperative Test Program on Crack Arrest Toughness Measurements.’’ NUREG/CR-3261,
U.S. Nuclear Regulatory Commission, Washington, DC, 1983.
33. Barker, D.B., Chona, R., Fourney, W.L., and Irwin, G.R., ‘‘A Report on the Round Robin Program
Conducted to Evaluate the Proposed ASTM Test Method of Determining the Crack Arrest Fracture
Toughness, K Ia , of Ferritic Materials.’’ NUREG/CR-4996, 1988.
34. BS 7448: Part 2, ‘‘Fracture Mechanics Toughness Tests, Part 1, Method for Determination of K IC , critical
CTOD and Critical J Values of Welds in Metallic Materials.’’ British Standards Institution, London, 1997.