Page 196 - Fundamentals of Enhanced Oil and Gas Recovery

184 Forough Ameli et al.

[5] R. Butler, D. Stephens, The gravity drainage of steam-heated heavy oil to parallel horizontal wells,
J. Can. Pet. Technol. 20 (02) (1981) 90 96.
[6] S. Farouq Ali, B. Abad, Bitumen recovery from oil sands, using solvents in conjunction with steam,
J. Can. Pet. Technol. 15 (03) (1976) 80 90.
[7] O.E. Herna ´ndez, S. Ali (Eds.), Oil recovery from Athabasca tar sand by miscible-thermal methods.
in: Annual Technical Meeting, Petroleum Society of Canada, 1972.
[8] B. Hascakir, How to select the right solvent for solvent-aided steam injection processes, J. Pet. Sci.
Eng. 146 (2016) 746 751.
[9] A. Turta, J. Lu, R. Bhattacharya, A. Condrachi, W. Hanson (Eds.), Current status of the commer-
cial in situ combustion (ISC) projects and new approaches to apply ISC, in: Canadian International
Petroleum Conference, Petroleum Society of Canada, 2005.
[10] J.G. Burger, Chemical aspects of in-situ combustion-heat of combustion and kinetics, Soc. Pet.
Eng. J. 12 (05) (1972) 410 422.
[11] A. Chhetri, M. Islam, A critical review of electromagnetic heating for enhanced oil recovery, Pet.
Sci. Technol. 26 (14) (2008) 1619 1631.
[12] K. Holdaway, Harness Oil and Gas Big Data with Analytics: Optimize Exploration and Production
with Data Driven Models, John Wiley & Sons, New York, 2014.
[13] J.G. Speight, The Chemistry and Technology of Petroleum, CRC Press, Boca Raton, FL, 2014.
[14] Deutsch, C., McLennan, J., 2005. Guide to SAGD (steam assisted gravity drainage) reservoir charac-
terization using geostatistics. Centre for Computational Excellence (CCG), Guidebook Series, vol.
3. University of Alberta, April 2003.
[15] D.S. Law, A New Heavy Oil Recovery Technology to Maximize Performance and Minimize
Environmental Impact, SPE International, Bethel, CT, 2011.
[16] M.R. Carlson, Practical Reservoir Simulation: Using, Assessing, and Developing Results, PennWell
Books, Houston, TX, 2003.
[17] D. Glassman, M. Wucker, T. Isaacman, C. Champilou, The Water-Energy Nexus: Adding Water to
the Energy Agenda, World Policy Institute, New York, 2011. 1.
[18] Q. Jiang, B. Thornton, J. Russel-Houston, S. Spence, Review of thermal recovery technologies for
the clearwater and lower grand rapids formations in the cold lake area in Alberta, J. Can. Pet.
Technol. 49 (09) (2010) 2 13.
[19] S. Thomas, Enhanced oil recovery-an overview, Oil Gas Sci. Technol. -Rev. l’IFP 63 (1) (2008) 9 19.
[20] M. Prats, A current appraisal of thermal recovery, J. Pet. Technol. 30 (08) (1978) 1 129.
[21] J. Alvarez, S. Han, Current overview of cyclic steam injection process, J. Pet. Sci. Res. 2 (3) (2013)
116 127.
[22] F. Hongfu, L. Yongjian, Z. Liying, Z. Xiaofei, The study on composition changes of heavy oils dur-
ing steam stimulation processes, Fuel 81 (13) (2002) 1733 1738.
[23] H. Pahlavan, I. Rafiqul, Laboratory simulation of geochemical changes of heavy crude oils during
thermal oil recovery, J. Pet. Sci. Eng. 12 (3) (1995) 219 231.
[24] J. Scott, S. Proskin, D. Adhikary, Volume and permeability changes associated with steam stimula-
tion in an oil sands reservoir, J. Can. Pet. Technol. 33 (07) (1994) 44 52.
[25] Poroelastic effects of cyclic steam stimulation in the Cold Lake Reservoir, in: D. Walters, A. Settari, P.
Kry, (Eds.), SPE/AAPG Western Regional Meeting, Society of Petroleum Engineers, 2000, pp. 1 10.
[26] D. Walters, A. Settari, P. Kry, Coupled geomechanical and reservoir modeling investigating poroe-
lastic effects of cyclic steam stimulation in the Cold Lake reservoir, SPE Reservoir Eval. Eng. 5 (06)
(2002) 507 516.
[27] Geomechanics for the thermal stimulation of heavy oil reservoirs-Canadian experience, in: Y. Yuan,
B. Xu, B. Yang, (Eds.), SPE Heavy Oil Conference and Exhibition, Society of Petroleum
Engineers, 2011.
[28] R. Wong, Y. Li, A deformation-dependent model for permeability changes in oil sand due to shear
dilation, J. Can. Pet. Technol. 40 (08) (2001) 37 44.
[29] Geomechanics of oil sands under injection, in: D.P. Yale, T. Mayer, J. Wang (Eds.), 44th US Rock
Mechanics Symposium and 5th US-Canada Rock Mechanics Symposium, American Rock
Mechanics Association, 2010.