Page 197 - Fundamentals of Enhanced Oil and Gas Recovery

185
Thermal Recovery Processes

[30] Geomechanics monitoring of cyclic steam stimulation operations in the clearwater formation, in: J.
Gronseth, ISRM International Symposium, International Society for Rock Mechanics, 1989.
[31] Mapping reservoir volume changes during cyclic steam stimulation using tiltmeter based surface
deformation measurements, in: J. Du, S.J. Brissenden, P. McGillivray, S.J. Bourne, P. Hofstra, E.J.
Davis, et al. (Eds.), SPE International Thermal Operations and Heavy Oil Symposium, Society of
Petroleum Engineers, 2005.
[32] M. Dusseault, L. Rothenburg, Analysis of deformation measurements for reservoir management,
Oil Gas Sci. Technol. 57 (5) (2002) 539 554.
[33] J. Van Lookeren, Calculation methods for linear and radial steam flow in oil reservoirs, Soc. Pet.
Eng. J. 23 (03) (1983) 427 439.
[34] S.M. Farouq Ali, No. CONF-820316- Steam Injection Theories: A Unified Approach, Society of
Petroleum Engineers, 1982.
[35] T.C. Boberg, Calculation of the production rate of a thermally stimulated well, J. Pet. Technol. 18
(12) (1966) 1 613.
[36] D.W. Green, G.P. Willhite, Enhanced Oil Recovery: Henry L. Doherty Memorial Fund of AIME,
Society of Petroleum Engineers Richardson, TX, 1998.
[37] hhttp://www.insitucombustion.ca/newprocesses.htmi.
[38] A. Hart, The novel THAI CAPRI technology and its comparison to other thermal methods for
heavy oil recovery and upgrading, J. Pet. Explor. Product. Technol. 4 (4) (2014) 427 437.
[39] Greaves M, Turta AT. Oilfield in-situ combustion process. Google Patents; 1997.
[40] Abarasi Hart, et al., Optimization of the CAPRI process for heavy oil upgrading: effect of hydrogen
and guard bed, Ind. Eng. Chem. Res. 52 (44) (2013) 15394 15406.
[41] M. Greaves, T. Xia, Downhole upgrading of Wolf Lake oil using THAI CAPRI processes-tracer
tests, Prepr. Pap. Am. Chem. Soc. Div. Fuel Chem. 49 (1) (2004) 69 72.
[42] Downhole upgrading Athabasca tar sand bitumen using THAI-SARA analysis, in: T. Xia, M.
Greaves, (Eds.), SPE International Thermal Operations and Heavy Oil Symposium, Society of
Petroleum Engineers, 2001.
[43] Xia, T., Greaves, M. (Eds.), 2001. 3-D physical model studies of downhole catalytic upgrading of
Wolf Lake heavy oil using THAI. In: Canadian International Petroleum Conference. Petroleum
Society of Canada.
[44] J.G. Weissman, Review of processes for downhole catalytic upgrading of heavy crude oil, Fuel
Process. Technol. 50 (2 3) (1997) 199 213.
[45] Hydrogen generation during in-situ combustion, in: L. Hajdo, R. Hallam, L. Vorndran, (Eds.), SPE
California Regional Meeting, Society of Petroleum Engineers, 1985.
[46] J.-H. Gong, L. Jun, Y.-H. Xu, Protolytic cracking in Daqing VGO catalytic cracking process, J.
Fuel Chem. Technol. 36 (6) (2008) 691 695.
[47] J.H. Lee, S. Kang, Y. Kim, S. Park, New approach for kinetic modeling of catalytic cracking of par-
affinic naphtha, Ind. Eng. Chem. Res. 50 (8) (2011) 4264 4279.
[48] Frauenfeld, T., Deng, X., Jossy, C. (Eds.), 2006. Economic analysis of thermal solvent processes. In:
Canadian International Petroleum Conference, Petroleum Society of Canada.
[49] I.J. Mokrys, R.M. Butler, The rise of interfering solvent chambers: solvent analog model of steam-
assisted gravity drainage, J. Can. Pet. Technol. 32 (03) (1993) 26 36.
[50] Allen JC, Woodward CD, Brown A, Wu CH. Multiple solvent heavy oil recovery method. Google
Patents; 1976.
[51] Allen JC, Redford DA. Combination solvent-noncondensible gas injection method for recovering
petroleum from viscous petroleum-containing formations including tar sand deposits. Google
Patents; 1978.
[52] S. Dunn, E. Nenniger, V. Rajan, A study of bitumen recovery by gravity drainage using low tem-
perature soluble gas injection, Can. J. Chem. Eng. 67 (6) (1989) 978 991.
[53] R.M. Butler, I.J. Mokrys, A new process (VAPEX) for recovering heavy oils using hot water and
hydrocarbon vapour, J. Can. Pet. Technol. 30 (01) (1991) 97 106.
[54] S. Farouq Ali, S. Snyder, Miscible thermal methods applied to a two-dimensional, vertical tar sand
pack, with restricted fluid entry, J. Can. Pet. Technol. 12 (04) (1973) 20 26.