Page 178 - Fundamentals of Water Treatment Unit Processes : Physical, Chemical, and Biological
P. 178

Sedimentation                                                                                    133


            Camp, T. R., Studies of sedimentation basin design, Sewage and  Katz, W. J., Geinopolos, A., and Mancini, J. L., Concepts of Sedi-
                Industrial Wastes, 25:1–12, 1953.                   mentation Applied to Design, Part 3, Water and Sewage
            Colorado Department of Health, Drinking Water Design Criteria,  Works, 257–259, July 1962c.
                Colorado Department of Health, Water Quality Control Div-  Kawamura, S., Hydraulic scale model simulation of the sedimenta-
                ision, Denver, Colorado, September 1987.            tion process, Journal of the American Water Works Associ-
            Crawford, S., Plant-scale tracer tests, Rumbles, Rocky Mountain  ation, 73(7):372–379, December 1986.
                Section AWWA-WEA Newsletter, July 1994.        Kawamura, S., Integrated Design of Water Treatment Facilities,
            Culp, G. L. and Conley, W., High-rate sedimentation with the tube  John Wiley & Sons, New York, 1991.
                clarifier concept, in: Gloyna, E. and Eckenfelder, W. W.  Kawamura, S., Optimization of basic water treatment processes—
                (Eds.), Water Quality Improvement by Physical and Chemical  Design and operation: Sedimentation and filtration, Aqua,
                Processes, Water Symposium No. 3., University of Texas  45(3):130–142, 1996.
                Press, Austin, TX, 1970.                       Keinath, T. M., Operational dynamics and control of secondary
            Culp, G., Hansen, S., and Richardson, G., High rate sedimentation in  clarifiers, Journal of Water Pollution Control Federation,
                water treatment works, Journal of the American Water Works  57(7):770–776, 1985.
                Association, 60(6):681–698, June 1968.         Keinath, T. M., Diagram for designing and operating secondary
            Daigger, G. T. and Roper, R. E., The relationship between SVI and  clarifiers according to the thickening criterion, Research Jour-
                activated sludge settling characteristics, Journal of Water Pol-  nal of the Water Pollution Control Federation, 62(3):254–258,
                lution Control Federation, 57(8):859–866, 1985.     1990.
            Dick, R. I., Role of activated sludge final settling tanks, Journal of  Langelier. W. F., Shallow sedimentation basins, Journal of the
                Sanitary Engineering Division, ASCE, 96(SA2):423–436,  American Water Works Association, 23(11):1484–1489, 1930.
                April 1970.                                    Malcolm Pirnie, Inc., The First Century, 1895–1995, Malcolm Pir-
            Dick,R.I.,Folkloreinthedesignoffinalsettlingtanks,JournalofWater  nie, Inc., White Plains, NY, c. 1995
                Pollution Control Federation, 48(4):633–644, April 1976.  Nemerow, N. L., Liquid Wastes of Industry, Theories, Practices, and
            Dick, R. I. and Ewing, B. B., Evaluation of activated sludge thick-  Treatment, Addison-Wesley, Reading, MA, 1971.
                ening theories, Journal of Sanitary Engineering Division,  Nemerow, N. L. and Agardy, F. J., Strategies of Industrial and
                ASCE, 93(SA4):9–29, August 1967.                    Hazardous Waste Management, Van Nostrand Reinhold,
            Dick, R. I. and Vesilind, P. A. The sludge volume index—What is  New York, 1998.
                it?, Journal of Water Pollution Control Federation,41  Purac, Eleven Hundred Plants in Forty Counties, Purac Corporation,
                (7):1285–1291, July 1969.                           Wilmington, DE, c. 1991
            Esler, J. K., Optimizing clarifier performance—An outline, in: Rocky  Rich, L. G., Unit Operations of Sanitary Engineering, John Wiley &
                Mountain Section WEA Preconference Workshop, Snowmass  Sons, Inc., New York, 1961.
                Village, CO, September 13, 1998.               Rouse, H. (Ed.), Advanced Mechanics of Fluids, John Wiley & Sons,
            Fair, G. M., Geyer, J. C., and Okun, D. A., Water and Wastewater  Inc., New York, 1959.
                Engineering, Volume 2. Water Purifications and Wastewater  Vesilind, P. A., The influence of stirring in the thickening of bio-
                Treatment and Disposal, John Wiley & Sons, New York, 1968.  logical sludge, PhD Dissertation, University of North Carolina,
            Fischerström, C. N. H., Sedimentation in rectangular basins, Proceed-  Chapel Hill, NC, 1968a (cited in Daigger and Roper (1985),
                ings Sanitary Engineering Division, ASCE, 81, Separate No.  Wahlberg and Keinath (1988), etc.).
                687:1–29, 1955.                                Vesilind, P. A., ‘‘Discussion of Dick, R. I. and Ewing, B. B.,
            Great Lakes—Upper Mississippi River Board of State Sanitary  Evaluation of activated sludge thickening theories, Journal of
                Engineers, Recommended Standards for Sewage Works,  Sanitary Engineering Division, ASCE, 93(SA4):9–29, August
                Health Education Service, Box 7283, Albany, NY, 1968.  1967,’’ Journal of Sanitary Engineering Division, ASCE,94
            Great Lakes—Upper Mississippi River Board of State Engineers,  (SA1):185–191, February 1968b.
                Recommended Standards for Water Works, Health Education  Wahlberg, E. J. and Keinath, T. M., Development of settling flux
                Service, Albany, NY, 1987.                          curves using SVI, Journal of Water Pollution Control Feder-
            Hane-Weijman, H., Lamella separation—Old technology in a mod-  ation, 60:2095–2100, 1988.
                ern concept, Unpublished paper for short course Water Treat-  Wahlberg, E. J., Stahl, J. F., Chen, C., and Augustus, M., Field
                ment Plant Design at Colorado State University, in June, 1991,  application of the Clarifier Research Technical Committee’s
                Purac Engineering, Inc., Wilmington, DE, 1991.      Protocol for evaluating secondary clarifier performance:
            Hansen, S. P. and Culp, G. L., Applying shallow depth sedimentation  Rectangular, cocurrent sludge removal clarifier, in: Paper
                theory, Journal of the American Water Works Association,  presented at 66th Annual Conference and Exposition, Water
                59(9):1134–1148, September 1967.                    Environment, Anaheim, CA, October 4, 1993.
            Hazen, A., On sedimentation, Transactions of the ASCE, 53:45,  Waterlink Technologies, Inclined Plate Settlers, Waterlink Brochure
                1904.                                               WL-609-5M-6=97-MCA,  Nordic  Water  Products,  Inc.,
            Hermanowicz, S. W., Secondary clarification of activated sludge:  Nunäshamn, Sweden, 1997.
                Development of operating diagrams, Water Environment  Watts, R. W., Svoronos, S. A., and Koopman, B., One-dimensional
                Research, 70(1):10–13, 1998.                        modeling of secondary clarifiers using a concentration
            Kamp, P. C., Research, design, and operating experience—WRK III  and feed velocity-dependent dispersion coefficient, Water
                treatment plant, Enkhuizen, Holland, paper without publica-  Research, 30(9):2112–2124, 1996.
                tion identification, c. 1989.                   Willis, R. M., Tubular settlers—A technical review, Journal of the
            Katz, W. J., Geinopolos, A., and Mancini, J. L., Concepts of Sedi-  American Water Works Association, 70(6):331–335, June
                mentation Applied to Design, Part 1, Water and Sewage  1978.
                Works, 162–165, April 1962a.                   WPCF, Clarifier design, in: Manual of Practice FD-8, Water Pollu-
            Katz, W. J., Geinopolos, A., and Mancini, J. L., Concepts of Sedi-  tion Control Federation, Washington, DC, 1985.
                mentation Applied to Design, Part 2, Water and Sewage  Yao, K. M., Design of high rate settlers, Journal of the Environmental
                Works, 169–171, May 1962b.                          Engineering Division, ASCE, 99(EE5):621–637, October 1973.
   173   174   175   176   177   178   179   180   181   182   183