Page 285 - Handbook of Adhesives and Sealants

250 Chapter Six

6.6.5 Other adherends
Appendix C-4 provides surface treatments for a variety of materials
not covered in the preceding tables. Other adherends commonly used
in bonded structures, their unique characteristics, and successful sur-
face treatments and bonding process are more fully described in Chap-
ter 16.

References
1. Hagemaier, D. J., ‘‘End Product Nondestructive Evaluation of Adhesive Bonded
Metal Joints’’, Adhesives and Sealants, vol. 3, Engineered Materials Handbook,
ASM International, 1990.
2. Schneberger, G. L., ‘‘Adhesives for Specific Substrates’’, Chapter 21, in Adhesives in
Manufacturing, G. L. Schneberger, ed. (New York: Marcel Dekker, Inc., 1983).
3. Chessin, N. and Curran, V., ‘‘Preparation of Aluminum Surface for Bonding’’, in
Structural Adhesive Bonding, M. J. Bodnar, ed. (New York: Interscience, 1966).
4. Muchnick, S. N., ‘‘Adhesive Bonding of Metals’’, Mech. Eng., January 1956.
5. Vazirani, H. N., ‘‘Surface Preparation of Steel and Its Alloys for Adhesive Bonding
and Organic Coatings’’, J. Adhesion, July 1969.
6. Vazirani, H. N., ‘‘Surface Preparation of Copper and Its Alloys for Adhesive Bonding
and Organic Coatings’’, J. Adhesion, July 1969.
7. Water, R. E., Voss, D. L., and Hochberg, M. S., ‘‘Structural Bonding of Titanium for
Advanced Aircraft’’, in Proc. Nat. SAMPE Tech. Conf., vol. 2, Aerospace Adhesives
and Elastomers, 1970.
8. Thelen, E., ‘‘Adherend Surface Preparation’’, in Symposium on Adhesives for Struc-
tural Applications, M. J. Bodnar, ed. (New York: Interscience, 1966).
9. Kinloch, A. J., Adhesion and Adhesives, (London: Chapman and Hall, 1987), at 339.
10. Brewis, D. M., ‘‘Pretreatment of Metals Prior to Bonding’’, in Handbook of Adhesion,
D. E. Backham, ed. (Essex, England: Longman Scientific and Technical, 1992).
11. Brewis, D. M., ‘‘Pretreatment of Polymers’’, in Handbook of Adhesion, D. E. Back-
ham, ed. (Essex, England: Longman Scientific and Technical, 1992).
12. Reynolds Metals Co., Adhesive Bonding Aluminum, Richmond, VA, 1966.
13. Gruss, B., ‘‘Cleaning and Surface Preparation’’, Metal Finishing, Organic Finishing
Guidebook and Directory Issue, May 1996.
14. Rogers, N. L., ‘‘Surface Preparation of Metals’’, in Structural Adhesive Bonding,
M. J. Bodnar, ed. (New York: Interscience, 1966).
15. Rosty, R., Martinelli, D., et al., SAMPE Journal, July/August, 1987.
16. Tira, J., SAMPE Journal, July/August 1987.
17. Bulat, Metal Progress, 68, 94–5 (1955) or Watts, J. F., ‘‘Degreasing’’, in Handbook
of Adhesion, D. E. Backham, ed. (Essex, England: Longman Scientific and Technical,
1992).
18. ‘‘Solvents Can be Environmentally Friendly’’, Manufacturing Engineering, May
1997.
19. Mackay, C. D., ‘‘Good Adhesive Bonding Starts with Surface Preparation’’, Ad-
hesives Age, June 1998.
20. Snogren, R. C., Handbook of Surface Preparation (New York: Palmerton Publishing
Company, Inc., 1974).
21. Knipe, R., ‘‘Green Cleaning Technologies’’, Advanced Materials and Processes, Au-
gust 1997.
22. Ismail, A., et al., ‘‘Metal Surface Treatment by Electrochemical Cleaning and Its
Influence on Long Term Strength of Metal Adhesive Bonds’’, Surface Chemical
Cleaning and Passivation for Semiconductor Processing, Materials Research Society
Symposium Proceedings, 1993, vol. 315, at 131–136.
23. Pocius, A. V. and Clus, J. J., Proc. 13th National SAMPE Tech. Conf. (1981),
SAMPE, Covina, CA, at 629–639.