Page 286 - Handbook of Adhesives and Sealants

Surfaces and Surface Preparation 251

24. Hansel, D., ‘‘Abrasive Blasting Systems’’, Metal Finishing, Organic Finishing Guide-
book and Directory Issue, May 1996.
25. Jenning, C. W., ‘‘Surface Roughness and Bond Strength of Adhesives’’, J. Adhesion,
May 1972.
26. Attia, F. G. and Hartsell, D. R., ‘‘Cryogenic Surface Preparation for Environmental
Compliance on Offshore Structures’’, Proceedings of the Energy Sources Technology
Conference, New Orleans, LA, 1994.
27. Howlett, J. J. and Dupuy, R., ‘‘Ultrahigh Pressure Water Jetting for Deposit Re-
moval and Surface Preparation’’, Materials Performance, vol. 32, no. 1, January
1993.
28. Keohan, F. L. and Phillips, P.G., ‘‘New Prebond Surface Treatments for Aluminum
Using Abrasive Free High Pressure Water Abrasion’’, 41st International SAMPE
Symposium, March 24–28, 1996, at 318–329.
29. Drust, B. E., ‘‘Dry Blast for UV and Coatings Removal’’, 35th Annual Technical
Conference Proceedings, Society of Vacuum Coaters, Baltimore, MD, 1992, at
211–217.
30. Comyn, J., Chapter 2, ‘‘Surface Treatments for Adhesion and Adhesion’’, in Adhe-
sion Science (Cambridge, England: Royal Society of Chemistry, 1997).
31. Schneberger, G. L., ‘‘Chemical and Electrochemical Conversion Treatments’’, En-
cyclopedia of Chemical Technology, 3rd ed., vol. 15, (New York: Wiley, 1981).
32. Florotec, Inc., Menomonee Falls, WI.
33. Bliefert, C., ‘‘Fluoridation of Plastic Surfaces’’, Metalloberflaeche, vol. 41, no. 8, Au-
gust 1987.
34. Kranz, G., et al., Int. J. Adhesion and Adhesives, 14 (4), 1994, at 243.
35. Yamada, K. et al, J. Appl. Polym. Sci., 44 (6), 1993, at 993.
36. Novak, I. and Poliak, V., Plasty a Kaucuk, 30 (3), 1993, at 80.
37. Mercx, F. P. M., Polymer, 34 (9), 1993, at 1981.
38. Lin, C., J. Mater. Sci. - Letters, ‘‘Modification of Polypropylene by Peroxide Catalyst
Grafting of Maleic Anhydride for Adhesive Bonding: Surface and Interface’’, 12 (8),
1993, at 612.
39. Novak I., et al., Fibers and Textiles in Eastern Europe, 3 (1), 1995, at 41.
40. The Loctite Design Guide for Bonding Plastics, LT-2197, Loctite Corporation.
41. Lepel High Frequency Laboratories, Inc.
42. Blitshteyn, M., McCarthy, B. C., et al., ‘‘Electrical Surface Treatment Improves Ad-
hesive Bonding’’, Adhesives Age, December 1994.
43. Rose, P. W. and Liston, E., ‘‘Gas Plasma Technology and Surface Treatment of Pol-
ymers Prior to Adhesive Bonding’’, SPE Annual Technical Conference, 1985.
44. ‘‘Ion-Beam Etching for Strong Adhesive Bonds’’, Mech. Eng., November 1980;
adapted from ‘‘Adhesive Bonding of Ion Beam Textured Metals and Fluoropoly-
mers’’, NASA TM-79004, and ‘‘Ion Beam Sputter Etching and Deposition of Fluo-
rocarbons’’, NASA TM-78888, by B. A. Banks, J. J. Mirtich, and J. S. Sovey, NASA
Lewis Research Center.
45. Uddin, M. N., et al., ‘‘Laser Surface Engineering of Automotive Components’’, Plas-
tics Engineering, February 1997.
46. Doyle, D. J., Structural Adhesives Engineering III—Conference Proceedings, PRI
Adhesives Group, 1992.
47. Novak, I. and Poliak, V., ‘‘Modification of Adhesive Properties of Isotactic Polypro-
pylene’’, Int. Polym. Sci. Tchnol., 20(5).
48. Blackman, B. R. K., Kinloch, A. J., et al., ‘‘The Plasma Treatment of Thermoplastic
Fiber Composites for Adhesive Bonding’’, Composites, May 1994.