Page 480 - Handbook of Electrical Engineering

19

Preparing Equipment Specifications

19.1 THE PURPOSE OF SPECIFICATIONS
The main purpose of preparing a specification for an item of equipment is to ensure that the purchaser,
who may also become the owner, obtains the equipment required, rather than what the supplier
or manufacturer thinks the purchaser should have. In many situations the difference in perception
of the requirements may be small and insignificant. However, for complicated equipment such as
high-voltage switchgear and generation systems the differences may be very significant.

In order to satisfy both the requirements of the owner and the available options from the
supplier, it is necessary to describe the requirements in various degrees of detail. The degree of detail
will be a function of the type of equipment. Complex equipment such as large motors, generators,
high-voltage switchgear and variable speed drive systems will need a more detailed description than
the more standardised equipment such as power cables, low-voltage motors and, to some extent,
low-voltage motor control centres.
Manufacturers of complex equipment regularly meet the needs of different owners, whose
requirements vary in content and emphasis. A particular owner may have different requirements
for the same type of equipment when it is used in offshore, as opposed to onshore, installations.
These environments may be radically different, e.g. Northern North Sea, desert conditions in the
Middle East, hot and humid climates of tropical locations. For example, the methods of cooling the
equipment and the ability to withstand corrosive conditions will be very different in these extremes
of environment.

On the other hand, simple equipment is less sensitive to extremes of location and environment.
The main aspect that affects simple equipment is its full-load rating for low and high ambient
temperatures. The details of the construction will be almost unaffected. Simple equipment used in
high ambient temperatures will tend to be physically larger and heavier. A motor of a given shaft
output rating may have a larger standard frame size when used in a desert than one used on a North
Sea production platform.
A standard specification of the owner should take account of what is generally available in
the market, and what can reasonably be called for as options. It is uneconomical and impractical
to overspecify aspects which a manufacturer cannot fulfil at a reasonable cost and with a sensible
production duration. Where possible the aim should be to match what the manufacturer can offer
from his standard range of equipment. An efficient approach by the purchaser is to call for equipment
that is a standard but most suitable product of the manufacturer plus the options offered, if these are

Handbook of Electrical Engineering: For Practitioners in the Oil, Gas and Petrochemical Industry. Alan L. Sheldrake
 2003 John Wiley & Sons, Ltd ISBN: 0-471-49631-6