Page 532 - Handbook of Electrical Engineering

STANDARDS USED FOR DESIGNING ELECTRICAL SYSTEMS & SPECIFYING EQUIPMENT 523

Ref Description

IEC60751 Platinum resistance thermometer sensors.
IEC60754 Test on gases evolved during combustion of electric cables.
Part 1: Determination of the amount of halogen acid gas evolved during
the combustion of polymeric materials taken from cables.
Part 2: Determination of degree of acidity amount of gases evolved
during the combustion of polymeric materials taken from cables
by measuring pH and conductivity.
IEC60781 Application guide for calculation of short-circuit currents in low-voltage
radial systems.
IEC60800 Heating cables with a rated voltage of 300/500 V for comfort heating and
prevention of ice formation.
IEC60801 Electromagnetic compatibility for industrial process measurement and
control equipment:
Part 1: General introduction.
Part 2: Electrostatic discharge requirements-test severity level 4.
Part 3: Radiated electromagnetic field requirements-test severity
level 3.
Part 4: Noise immunity against fast transient disturbances-test severity
level 3.
Part 5: Surge immunity requirements-test severity level 4.
Part 6: Immunity to conducted radio frequency disturbances above
9 kHz-test severity level 2.
IEC60812 Analysis techniques for system reliability – Procedure for failure mode and
effects analysis (FMEA).
IEC60815 Guide for the selection of insulators in respect of polluted conditions.
IEC60826 Loading strength of electrical overhead lines.
IEC60831 Shunt power capacitors of the self-healing type for AC systems having a
rated voltage up to and including 1000 V.
Part 1: General-performance, testing and rating-safety
requirements – Guide for installation and operation.
Part 2: Ageing test, self-healing and destruction test.
IEC60836 Specification for silicone liquids for electrical purposes.
IEC60840 Tests for power cables with extruded insulation for rated voltage above
30 kV.
IEC60851 Methods of test for winding wire.
Part 1: General
IEC60865 Short-circuit currents – Calculation of effects.
Part 1: Definitions and calculation methods.
Part 2: Examples of calculation.
IEC60871 Shunt capacitors for AC power systems having a rated voltage above 660 V.
Part 1: General-performance, testing and rating-safety
requirements – Guide for installation and operation
Part 2: Endurance testing.
(continued overleaf )