Page 533 - Handbook of Electrical Engineering

524 HANDBOOK OF ELECTRICAL ENGINEERING

Ref Description

IEC60885 Electric test methods for electric cables.
Part 1: Electrical tests for cables, cords and wires for voltages up to and
including 450/750 V.
Part 2: Partial discharge tests.
Part 3: Test methods for partial discharge measurement on lengths of
extruded power cable.
IEC60896 Stationary lead-acid batteries. General requirements and methods of
test.
IEC60898 Circuit breakers for overcurrent protection for household and similar
installations.
IEC60905 Loading guide for dry type power transformers.
IEC60906 IEC systems of plugs and socket-outlets for household and similar
purposes.
Part 1: Plugs and socket-outlets 16 A 250 V AC
Part 2: Plugs and socket-outlets 15 A 125 V AC
IEC60909 Short-circuit current calculation in three-phase AC systems. Third impression
1991.
Part 1: Factors for the calculation of short-circuit currents in three-phase
AC systems according to IEC60909.
Part 2: Electrical equipment – Data for short-circuit current calculation in
accordance with IEC60909 (1988).
IEC60944 Guide for the maintenance of silicone transformer liquids.
IEC60947 Low-voltage switchgear and control gear.
Part 1: General rules.
Part 2: Circuit breakers.
Part 3: Switches, disconnectors, switch disconnectors, and
fuse-combination units.
Part 4: Contractors and motor starters. Section one: electromechanical
contactors and motor starters.
IEC60993 Electrolyte for vented nickel cadmium cells.
IEC61000 Electromagnetic compatibility (EMC)
IEC61000-1-1 Part 1: General – Section 1: Application and interpretation of
fundamental definitions and terms.
IEC61000-2-1 Part 2: Environmental – Section 1: Description of the environment:
electromagnetic environment for low-frequency conducted
disturbances and signaling in public power supply systems.
IEC61000-2-2 Part 2: Environment – Section 2: Compatibility levels for low-frequency
conducted disturbances and signaling in public low-voltage power
supply systems.
IEC61000-2-4 Part 2: Environment – Section 4: Compatibility levels in industrial plans
for low-frequency conducted disturbances.
IEC61000-3-2 Electromagnetic compatibility (EMC) limits for harmonic current emissions
(equipment current <16 A per phase)