Page 535 - Handbook of Electrical Engineering

526 HANDBOOK OF ELECTRICAL ENGINEERING

B.3 INTERNATIONAL STANDARDS ORGANISATION (WORLDWIDE)

Ref Description
ISO3 Preferred numbers (voltages, currents, kVA etc.).
ISO281 Rolling bearings – dynamic load ratings and rating life.
ISO1000 Specification for SI units and recommendations for the use of their
multiples and of certain other units.
ISO1680 Acoustics: Test code for the measurement of airborne noise emitted by
rotating electrical machinery.
ISO1813 Antistatic endless V-belts – electrical conductivity-characteristics and
methods of test.
ISO2372 Mechanical vibration of machines with operating speeds from 10 to
200 rev /sec. Basis for specifying evaluation standards.
ISO3046/IV Reciprocating internal combustion engines: Performance.
Part 1: Specifications for standard reference conditions and
declarations of power, fuel consumption and lubricating oil
consumption.
Part 2: Test methods
Part 3: Specification of test measurements.
Part 4: Speed governing.
Part 5: Torsional vibrations.
Part 6: Specifications for overspeed protection.
Part 7: Specifications for codes for engine power.
ISO5292 Industrial V-belt drives. Calculation of power ratings.
ISO9000 Quality management and quality assurance standards – guidelines for
selection and use.
ISO9001 Quality systems. Model for quality assurance in design, development,
production, installation and servicing.
ISO9002 Quality systems. Model for quality assurance in production, installation
and servicing.
ISO9003 Quality systems. Model for quality assurance in final inspection and
test.
ISO9004 Quality management and quality system elements.

B.4 BRITISH STANDARDS INSTITUTION (UK)

Ref Description
BS116 Oil circuit breakers (for alternating current systems above 1 kV)
{BS5311: 1 to 7} {High-voltage alternating current circuit breakers.}
BS162 Electric power switchgear and associated apparatus.
{BS7354} {Code of practice for the design of high voltage open terminal stations.}
BS170
{BS5000: 2} {Rotating electrical machines of particular types or for particular
applications. Part 2: Specific requirements or turbine type
synchronous machines.}