Page 556 - Handbook of Electrical Engineering

548 HANDBOOK OF ELECTRICAL ENGINEERING

• Report for the power management system operation and design.
• Key single-line diagram.
• Single-line diagram of each switchboard.
• Load schedule of each switchboard.
• Report for load flow calculations.
• Short circuit calculations and a report.
• Report for harmonic penetration studies.
• Report of protective relaying studies.
• Report for the study of sizing of major equipment.
• Plot plans showing the locations of electrical equipment.
• Plot plans showing hazardous areas.
• Plot plans showing main cable and overhead line routes.
• Plans, elevations and sections of buildings and main rooms.
• Plans, elevations and sections of large electrical equipment, e.g. switchgear, motor control centers,
transformers, generators, HV motors.
• Plans and elevations for cable trenching, racking and routing.
• Details of cable trench cross-sections and contents.
• Equipment lists, including their unique tag numbers.
• Schedule of protective relaying settings.
• Report of earthing system studies.
• Report for the sizing of the main cables and overhead lines.
• Report for the selection of lighting equipment types and illumination levels, including sample
calculations.
• Block cable schematic diagrams.
• Schedules of cables.
• Schedules of cable drums.
• Project specifications for all items of equipment.
• Project data sheets for all items of equipment.
• Schedules of switchboard control and indication requirements.
• Wiring diagrams for switchboards and motor control centers.
• Wiring diagrams for control and annunciator panels.
• Wiring and terminal connection diagrams for generators, large motors, pumps, compressors and
heavy machinery.
• Wiring and terminal connection diagrams for marshalling and junction boxes.
• Wiring and terminal connection diagrams for heat-tracing systems.
• Block diagrams for control, indication, measurements, interlocking, synchronising, and interfacing
with intelligent networks.
• Narrative and detailed diagrams for interfacing details with other disciplines.
• Detail design diagrams and drawings for equipment fixings and installation for both large and
small equipment.