Page 72 - Handbook of Properties of Textile and Technical Fibres
P. 72

Testing and characterization of fibers                              53

           Brims M, Hwang H: Fibre diameter distribution measurements, Global insulation section,
               March 2015.
           Campbell D, White JR: Polymer characterization, London, 1989, Chapman and Hall, pp
               247e248.
           Carniero F, Barcellos A: Concrete tensile strength. In International Association of Testing and
               Research Laboratories for materials and structures vol. 16. Paris.
           Di Carlo JA: ASTM-STP 617:443e465, 1977.
           Cotte Y, Toy F, Jourdain P, Pavillon N, Boss D, Magistretti P, Marquet P, Depeursinge C:
               Marker-free phase nanoscopy, Nat Photon 7:418, 2013.
           Colomban Ph: Adv Eng Mater 4(8):536e542, 2002.
           Colomban Ph, Herrera Ramirez JM, Paquin R, Marcellan A, Bunsell AR: Eng Fracture Mech
               73:2463e2475, 2006.
           Fidan S, Palazotto A, Tsai CT, Kumar S: Comp Sci Tech 49:291e297, 1993.
           Gindl-Altmutter W, Eichhorn SJ, Burghammer M, Keckes J: Radial crystalline texture in a
               lyocell fibre revealed by synchrotron nanofocus wide-angle X-ray scattering, Cellulose
               21(1):845e851, 2014.
           Gonsalvas VE: Text Res J 17:369e375, 1947.
           Guo F, Zhang ZZ, Liu WM, Su FH, Zhang HJ: Effect of plasma treatment of Kevlar fabric on the
               tribological behavior of Kevlar fabric/phenolic composites, Tribol Int 42(2):243e249,
               2009.
           Gustafsson: Surpassing the lateral resolution limit by a factor of two using structured illumi-
               nation microscopy, J Microsc 198(Pt 2), 2000.
           Hadley DW, Ward IM, Ward J: Transverse compression of anisotropic fibre monofilaments,
               Proc R Soc Lond Ser A Mathematical Phys Sci 285(1401):275, 1965.
           Hagege R, Bunsell AR: Fibre reinforcements for composite materials, Amsterdam, 1988,
               Elsevier, pp 479e515.
           Halliday D, Resnick R: Fundamentals of physics, ed 2, New York, 1986, Wiley, pp 861e863.
           Hermans PH: The degree of crystallinity in native and regenerated cellulose fibres following
               from x-ray analysis, Bull Des Soc Chim Belg 57(5e6):123e135, 1948.
           Herrera Ramirez JM, Bunsell AR, Colomban Ph: J Mat Sci 41:7261e7271, 2006.
           Huang D, Swanson EA, Lin CP, Schuman JS, Stinson WG, Chang W, Hee MR, Flotte T,
               Gregory K, Puliafito CA, et al.: Optical coherence tomography, Science 254(5035):
               1178e1181, November 22, 1991.
           Jones WR, Johnson JW: Carbon 9:645e655, 1971.
           Kawabata S: Micromeasurement of the mechanical properties of single fibers. In
               Raheel Mastura, editor: Modern textile characterization methods, NY, 1996, CRC Press,
               pp 311e329 (chapter 9).
           Kim JH, Alan Heckert N, Mates SP, Seppala JE, McDonough WG, Davis CS, Rice KD,
               Holmes GA: Effect of fiber gripping method on the single fiber tensile test: II. comparison
               of fiber gripping materials and loading rates, J Mater Sci 2015(50):2049e2060, 2015.
           Lafitte MH, Bunsell AR: Pol Eng Sci 25:182e186, 1985.
           Lavaste V, Berger MH, Bunsell AR, Besson J: J Mater Sci 30:4215e4225, 1995.
           Le Clerc Ch, Bunsell AR, Monasse B: J Mat Sci 42:9276e9283, 2007.
           McCrone WC, McCrone LB, Delly JG: Polarized light microscopy, Chicago, 1984, McCrone
               Research Institute, pp 96e97.
           Madara DS, Namango S, Ataro E, Simati S, Oyondi E, Tuigong D, Dulo B: FAVIMAT:
               introduction, development and potentials in Kenyan context, J Emerg Trends Eng Appl Sci
               (JETEAS) 6(2):98e106, 2015.
   67   68   69   70   71   72   73   74   75   76   77