Page 185 - Handbook of Structural Steel Connection Design and Details

Design of Connections for Axial, Moment, and Shear Forces

170 Chapter Two

Huang, J. S., Chen, W. F., and Beedle, L. S., “Behavior and Design of Steel Beam to Column
Moment Connections,” Bulletin 188, Welding Research Council, New York, October, 1973.
Kato, B. and McGuire, W., “Analysis of T-Stub Flange to Column Connections,” Journal of the
Structural Division, ASCE, vol. 99, no. ST5, May 1973, pp. 865–888.
Kloiber, L., and Thornton, W., “Design Approaches to Shear Connections for Skewed Members
in Steel Structures,” Building to Last, Proceedings of Structures Congress XV, ASCE,
Portland, OR, April 13–16, 1997.
Kulak, G. L., Fisher, J. W., and Struik, J. H. A., Guide to Design Criteria for Bolted and
Riveted Joints, Wiley-Interscience, New York, 1987.
Kulak, G. L., and Green, D. L., “Design of Connections in Wide Flange Beam or Girder
Splices,” Engineering Journal, vol. 27, no. 2, 2d quarter, 1990, pp. 41–48.
Mann, A. P., and Morris, L. J., “Limit Design of Extended End Plate Connection,” Journal of
the Structural Division, ASCE, vol. 105, no. ST3, March 1979, pp. 511–526.
McGuire, W., Steel Structures, Prentice Hall, Englewood Cliffs, NJ, 1968, p. 933.
Mohr, B. and Murray, T.M., “Investigation of Ultimate Bending Strength of Steel of Steel
Bracket Plates,” Masters Thesis, Virginia Tech., 2005, Blacksburg, VA.
Murray, T., “Design of Lightly Loaded Column Base Plates,” Engineering Journal, vol. 20,
no. 4, 4th quarter, 1983, pp. 143–152.
Richard, R. M., “Analysis of Large Bracing Connection Designs for Heavy Construction,”
National Steel Construction Conference Proceedings,AISC, Chicago, IL, 1986, pp. 31.1–31.24.
Richard, R. M., et al., “Analytical Models for Steel Connections,” Behavior of Metal Structures,
Proceedings of the W. H. Munse Symposium, W. J. Hall and M. P. Gaus, eds., May 17, 1983,
ASCE, NY.
Sputo, T., and Ellifrit, D. S. “Proposed Design Criteria for Stiffened Seated Connections to
Column Webs,” Proceedings of the AISC National Steel Construction Conference,
Washington, DC, 1991, pp. 8.1–8.26.
Stockwell, F. W., Jr., “Preliminary Base Plate Selection,” Engineering Journal, vol. 21,
no. 3, 3d quarter, 1975, pp. 92–99.
Struik, J. H. A., and deBack, J., “Tests on T-Stubs With Respect to a Bolted Beam to
Column Connections,” Report 6-69-13, Stevin Laboratory, Delft University of Technology,
Delft, The Netherlands, 1969 [as referenced in Kulak, Fisher, and Struik (1987)],
pp. 272–282.
Thornton, W. A., “Prying Action—A General Treatment,” Engineering Journal, vol. 22,
no. 2, 2d quarter, 1985, pp. 67–75.
Thornton, W. A., “Design of Small Base Plates for Wide Flange Columns,” Engineering
Journal, vol. 27, no. 3, 3d quarter, 1990a, pp. 108–110.
Thornton, W. A., “Design of Small Base Plates for Wide Flange Columns—A Concatenation
of Methods,” Engineering Journal, vol. 27, no. 4, 4th quarter, 1990b, pp. 173–174.
Thornton, W. A., “On the Analysis and Design of Bracing Connections,” National Steel
Construction Conference Proceedings, AISC, Chicago, IL, 1991, pp. 26.1–26.33.
Thornton, W. A., “Strength and Serviceability of Hanger Connections,” Engineering
Journal, vol. 29, no. 4, 4th quarter, 1992, pp. 145–149.
Thornton, W. A., “Treatment of Simple Shear Connections Subject to Combined Shear and
Axial Forces,” Modern Steel Construction, vol. 35, no. 9, September, 1995a, pp. 9–10.
Thornton, W. A., “Connections—Art, Science and Information in the Quest for Economy
and Safety,” Engineering Journal, vol. 32, no. 4, 4th quarter, 1995b, pp. 132–144.
Thornton, W. A., “Rational Design of Tee Shear Connections,” Engineering Journal,
vol. 33, no. 1, 1st quarter, 1996, pp. 34–37.
Thornton, W. A., “Strength and Ductility Requirements for Simple Shear Connections with
Shear and Axial Load,” Proceedings, National Steel Construction Conference, AISC,
Chicago, IL, May 7–9, 1997.
Timoshenko, S. P., and Goodier, J. N., Theory of Elasticity, 3d ed., McGraw-Hill, New York,
1970, pp. 57–58.
Vasarhelyi, D. D., “Tests of Gusset Plate Models,” Journal of the Structural Division,
ASCE, vol. 97, no. ST2, February 1971.
Whitmore, R. E., “Experimental Investigation of Stresses in Gusset Plates,” University of
Tennessee Engineering Experiment Station Bulletin 16, May 1952, University of
Tennessee, Knoxville.

Downloaded from Digital Engineering Library @ McGraw-Hill (www.accessengineeringlibrary.com)
Copyright © 2009 The McGraw-Hill Companies. All rights reserved.
Any use is subject to the Terms of Use as given at the website.