Page 213 - Hybrid-Renewable Energy Systems in Microgrids
P. 213

Sensitivity and transient stability analysis of fixed speed wind generator   193

           References


            [1] Global Wind Energy Council Report, 2016 [online]. Available from: http://www.gwec.
               net/wpcontent/uploads/2016/03/GWEC_Global_Wind_2016_Report_LR.pdf
            [2] Holdsworth, L., Wu, X.G., Ekanayeke, J.B., Jenkins, N., 2003. Comparison of fixed speed
               and doubly fed induction wind turbine during power system disturbances. Proc Ist Elec.
               Commun. 150 (3), 343–352, May.
            [3] Dahal, S., Mithulananthan, N., Saha, T., 2010. Investigation of small signal stability of a
               renewable energy based electricity distribution system. Power and Energy Society General
               Meeting.
            [4] Krause, P.C., 1987. Analysis of Electric Machinery. MacGraw-Hill, New York.
            [5] Chompoobutrgool, Vanfretti, L., 2012. Identification of power system dominant inter-
               area oscillation paths. IEEE  Transactions on Power Systems. doi:10.1109/TPWRS.
               2012.2227840, Dec. Available for early access.
            [6] Ravichandran, S., Dasan, S.G.B., Devi, R.P.K., 2011. Small signal stability analysis of
               grid connected wind energy conversion systems. international conference on Electrical,
               Electronics and Control Engineering (ICONRAEeCE), 15–17 44–50 December.
            [7] Tabesh, A., Iravani, R., 2006. Small-signal dynamic model and analysis of a fixed-speed
               wind farm-a frequency response. IEEE Trans. Power Delivery 21 (2), 778–787.
            [8] Rashid, G., Ali, M.H., 2014. A modified bridge-type fault current limiter for fault ride-
               through capacity enhancement of fixed speed wind generator. IEEE Trans. Energy Conv.
               29 (2), 527–534, June.
            [9] Xianqi, L., Zhiyuan, Z., Jianzhong, Z., Yongchuhan, Z., 2008. Small signal stability analy-
               sis of large scale variable speed wind turbines integration. International conference on
               Electrical machines and systems (ICEMS), October 17–20. 2526–25300.
           [10] Chen, J., Hu, Y., Blaabjerg, F., 2007. Stability improvement of induction generator. IET
               Renew. Power Gen. 1 (1), 81–93.
           [11] Hu, Y., Chen, Z., 2010. Effects of capacitor bank on fault ride through capability of induc-
               tion generator based wind turbines. Power Energy Engin. Conf. (APPEEC), Asia-Pacific
               28 (31), 1–4.
           [12] Chompoo-inwai, C., Yingvivatanapong, C., Methaprayoon, K., Lee, W.J., 2005. Reactive
               compensation techniques to improve the ride-through capability of wind turbine during
               disturbance. IEEE Trans. Ind. Appl. 41, 3, May/June.
           [13] Wang, L., Chen, S.-S., Lee, W.-J., Zhe Chen, 2009. Dynamic stability enhancement and
               power flow control of a hybrid wind and marine-current farm using SMES. IEEE Trans.
               Energy Conv. 24 (3), 626–639.
           [14] Saad-Saoud, Z., Lisboa, M.L., Ekanayake, J.B., Jenkins, N., Strbac, G., 1998. Applications
               of STATCOM to the wind farms. IEE Proc. Gener. Transm. Distrib. 145 (5), 511–516,
               September.
           [15] Wang, L., Nan-Li, C., Ting-Cheng, Y., Ting-Kao, Y., Vina, Wen-Wang, S., Lee, W.-J.,
               Zhe Chen, 2011. Analysis of hybrid offshore wind and tidal farm connected to a power
               grid using a flywheel energy storage system’. IEEE Power and Energy Society General
               Meeting, July 24–29.
           [16] Causebrooke, A., Atkinson, J., Jack, A.J., 2007. Fault ride through of large wind farms using
               series dynamic braking resistor. IEEE Trans. Power System 22 (3), 966–975, March 2007.
           [17] Hasanuzzaman Shawon, M., Ahmed Al Durra, S., Muyeen, M., 2012. Small signal stabil-
               ity analysis of fixed speed wind generator including SDBR. 20th International Conference
               on Electrical Machines, 2165–2171.
   208   209   210   211   212   213   214   215   216   217   218