Page 200 - Introduction to Colloid and Surface Chemistry

Charged interfaces 189

concentration and charge number are of primary importance. R may
be a cation exchanger (fixed negatively charged groups, such as
—SO J or -COO~) or an anion exchanger (fixed positively charged
groups, such as —NH^). A range of highly porous synthetic cation
and anion exchange resins are available commercially. The porosity
of the resin facilitates fairly rapid ion exchange,
The most important applications of ion exchange are the softening
of water and the 'deionisation' of water.
In the first of these processes, hard water is passed through a
column of a cation exchange resin usually saturated with sodium
counter-ions. The doubly charged (and, therefore, more strongly
adsorbed) calcium ions in the water exchange with the singly charged
sodium ions in the resin, thus softening the water. Regeneration of
the resin is effected by passing a strong solution of sodium chloride
through the column.
The 'deionisation' of water involves both anion and cation
exchange. A cation exchange resin saturated with hydrogen ions and
an anion exchange resin saturated with hydroxyl ions are used, often
in the form of a mixed ion exchange resin. These hydrogen and
hydroxyl ions exchange with the cations and anions in the water
sample and combine to form water.
Ion exchange has many preparative and analytical uses; for
example, the separation of the rare earths is usually achieved by
cation exchange followed by elution of their complexes with citric
acid.

92
Electrolcinetic phenomena

Electrokinetic is the general description applied to four phenomena
which arise when attempts are made to shear off the mobile part of
the electric double layer from a charged surface.
If an electric field is applied tangentially along a charged surface, a
force is exerted on both parts of the electric double layer. The
charged surface (plus attached material) tends to move in the
appropriate direction, while the ions in the mobile part of the double
layer show a net migration in the opposite direction, carrying solvent
along with them, thus causing its flow. Conversely, an electric field is
created if the charged surface and the diffuse part of the double layer
are made to move relative to each other.