Page 255 - Machinery Component Maintenance

Machinery Alignment 231

Similar information was published in Hydrocurbon Processing, Sep-
tember 1973.
6. Gibbs, C. R. and Wren, J. R., “Aligning Horizontal Machine Sets.”
Allis-Chulmers Engineering Review. About 1968-exact date not
known.
7. Jackson, Charles, “How to Align Barrel-Type Centrifugal Com-
pressors.” Hydrocarbon Processing, (September 197 1 ) (Corrected
Reprint).
8. Jackson, Charles, “Start Cold for Good Alignment of Rotating
Equipment.” The Oil and Gas Journul, March 11, 1974, pp. 124-
130.
9. Jackson, Charles, “Techniques for Alignment of Rotating Equip-
ment .” Hydrocarbon Processing, LV (January 1976), 8 1 - 86.
10. King, W. E, and Petermann, J. E., “Align Shafts, Not Couplings!”
Allis-Chalmers Electrical Review. Second Quarter 1951, pp. 26-29.
1 1. Nelson, Carl A., “Orderly Steps Simplify Coupling Alignment.”
Plant Engineering, June 1967, pp . 176- 178.
12. “Service Memo SD-5-69; Reverse Reading Coupling Alignment .”
Houston: Dresser Industries, Inc., Machinery Group, 1969.
13. Durkin, Tom, “Aligning Shafts.” Plant Engineering, January 1 1,
1979, pp. 86-90, and February 8, 1979, pp. 102-105.
14. Zatezalo, John, “A Machinery Alignment System for Industry.”
Pittsburgh: IMS - Industrial Maintenance Systems, Inc., 1981.
15. Hamar, Martin R., “Laser Alignment in Industry - ASTME Paper
MR68-408.” Dearborn, Michigan: The American Society of Tool
and Manufacturing Engineers, 1968.
16. Murray, Malcolm G., “Out of Room? Use Minimum Movement
Machinery Alignment .” Hydrocarbon Processing, Houston, Tx,
January 1979, pp. 112-1 14.