Page 369 - Marine Structural Design

Chapter I7 Fatigue Capaciv 345

17. Geyer, J.F. and Stahl, B. (1986), “Simplified Fatigue Design Procedure for Offshore
Structures”, Offshore Technology Conference, OTC Paper 533 1, Houston, Texas, May
5-8.
18. Healy B.E. and Bultrago, J. (1994), “Extrapolation Procedures for Determining SCFs
in Mid-surface Tubular Joint Models”, 6” Int. Symposium on Tubular Joint Structures,
Monash University, Melbourne, Australia.
19. Hobbacher, A. (1 996), “Fatigue Design of Welded Joints and Components”,
International Institute of Welding (IIW), XIII-1539-96/XV-845-96, Abington Pub.,
Cambridge, UK.
20. HSE (1 995), “Offshore Installation, Guidance on Design, Construction and
Certification”, UK Health and Safety Executives, 4th Edition, Section 21.
21. IACS (1999), “Recom. 56.1 : Fatigue Assessment of Ship Structures”, International
Association of Classification Societies, July 1999.
22. ISO/CD 19902 “Petroleum and natural Gas Industries - Offshore Structures - Fixed
Steel Structures”, Chapter 16, Fatigue Strength of Connections, International Standard
Organization.
23. Kung J.G., Potvin A et a1 (1975), “Stress Concentrations in Tubular Joints”, Paper
OTC 2205, Offshore Technology Conference.
24. Lalani, M. (1992), “Developments in Tubular Joint Technology for Offshore
Structures”, Proceedings of the International Conference on Offshore and Polar
Engineering, San Francisco, CA.
25. Maddox, S. (2001), “Recommended Design S-N Curves for Fatigue Assessment of
FPSOs,” ISOPE-2001, Stavanger.
26. Marshall P. W. (1992), “Design of Welded Tubular Connections”, Elsevier Press,
Amsterdam.
27. Marshall, P.W. (1993), “MI Provisions for SCF, SN and Size-Profile Effects,”
Offshore Technology Conference, Houston, TX.
28. Niemi, E. (1 993), “Stress Determination for Fatigue Analysis of Welded Components”,
International Institute of Welding (IIW), Technical Report LTSiIIW- 122 1-93.
29. Niemi, E. (1994), “On the Determination of Hot Spot Stress in the Vacinity of Edge
Gussets”, International Institute of Welding (IIW), Technical Report IISIIIW-1555-94.
30. NS 3472 (1984), “Design of Steel Structures”, Norwegian Standards.
31. NTS (1998), ’Design of Offshore Structures, Annex C, Fatigue Strength Analysis”,
NORSOK Standard N-004.
32. Pilkey, W. (1 997), “Petersen 5 Stress Concentration Factors”, 2nd Edition, John Wiley
and Sons, Inc.
33. Radaj, D. (1990), “Design and Analysis of Fatigue Resistant Structures”, Abington
Pub., Cambridge, UK.
34. Smedley, P. and Fisher, P. (1990), “Stress Concentration Factors for Ring-Stiffened
Tubular Joints”, International Symposium on Tubular Structures, Delft, June 1990.