Page 344 - Mechanical Engineers' Handbook (Volume 4)

References 333

10. K. J. Bell, ‘‘Approximate Sizing of Shell-and-Tube Heat Exchangers,’’ Section 3.1.4, HEDH.
11. J. Taborek, ‘‘Shell and Tube Heat Exchangers, Single-Phase Flow,’’ Section 3.3, HEDH.
12. D. Q. Kern, Process Heat Transfer, McGraw-Hill, New York, 1950.
13. J. W. Palen and J. Taborek, ‘‘Solution of Shellside Heat Transfer and Pressure Drop by Stream
Analysis Method,’’ Chem. Eng. Prog. Symp. Series 65(92) (1969).
14. A. C. Mueller, ‘‘Condensers,’’ Section 3.4, HEDH.
15. B. D. Smith, Design of Equilibrium Stage Processes, McGraw-Hill, New York, 1963.
16. V. L. Rice, ‘‘Program Performs Vapor-Liquid Equilibrium Calculations,’’ Chem. Eng., 77–86 (June
28, 1982).
17. R. S. Kistler and A. E. Kassem, ‘‘Stepwise Rating of Condensers,’’ Chem. Eng. Prog. 77(7), 55–59
(1981).
18. G. Breber, J. Palen, and J. Taborek, ‘‘Prediction of Horizontal Tubeside Condensation of Pure Com-
ponents Using Flow Regime Criteria,’’ Heat Transfer Eng. 1(2), 72–79 (1979).
19. D. Butterworth, ‘‘Condensation of Vapor Mixtures,’’ Section 2.6.3, HEDH.
20. R. G. Sardesai, ‘‘Condensation of Mixtures Forming Immiscible Liquids,’’ Section 2.5.4, HEDH.
21. K. J. Bell and A. M. Ghaly, ‘‘An Approximate Generalized Design Method for Multicomponent/
Partial Condensers,’’ AIChE Symp. Ser., No. 131, 72–79 (1972).
22. J. E. Diehl, ‘‘Calculate Condenser Pressure Drop,’’ Pet. Refiner 36(10), 147–153 (1957).
23. I. D. R. Grant and D. Chisholm, ‘‘Two-Phase Flow on the Shell-side of a Segmentally Baffled Shell-
and-Tube Heat Exchanger,’’ Trans. ASME J. Heat Transfer 101(1), 38–42 (1979).
24. K. Ishihara, J. W. Palen, and J. Taborek, ‘‘Critical Review of Correlations for Predicting Two-Phase
Flow Pressure Drops Across Tube Banks,’’ Heat Transfer Eng. 1(3) (1979).
25. J. W. Palen, ‘‘Shell and Tube Reboilers,’’ Section 3.6, HEDH.
26. R. A. Smith, ‘‘Evaporaters,’’ Section 3.5, HEDH.
27. J. G. Collier, ‘‘Boiling and Evaporation,’’ Section 2.7, HEDH.
28. J. R. Fair, ‘‘What You Need to Design Thermosiphon Reboilers,’’ Pet. Refiner 39(2), 105 (1960).
29. J. R. Fair and A. M. Klip, ‘‘Thermal Design of Horizontal Type Reboilers,’’ Chem. Eng. Prog. 79(3)
(1983).
30. J. W. Palen and C. C. Yang, ‘‘Circulation Boiling Model of Kettle and Internal Reboiler Perform-
ance,’’ Paper presented at the 21st National Heat Transfer Conference, Seattle, WA, 1983.
31. J. W. Palen, A. Yarden, and J. Taborek, ‘‘Characteristics of Boiling Outside Large Scale Multitube
Bundles,’’ Chem. Eng. Prog. Symp. Ser. 68(118), 50–61 (1972).
32. J. W. Palen, C. C. Shih, and J. Taborek, ‘‘Performance Limitations in a Large Scale Thermosiphon
Reboiler,’’ Proceedings of the 5th International Heat Transfer Conference, Tokyo, 1974, Vol. 5, pp.
204–208.
33. J. W. Palen, C. C. Shih, and J. Taborek, ‘‘Mist Flow in Thermosiphon Reboilers,’’ Chem. Eng. Prog.
78(7), 59–61 (1982).
34. R. Brown, ‘‘A Procedure for Preliminary Estimate of Air-Cooled Heat Exchangers,’’ Chem. Eng.
85(8), 108–111 (Mar. 27, 1978).
35. E. C. Smith, ‘‘Air-Cooled Heat Exchangers,’’ Chem. Eng. (Nov. 17, 1958).
36. V. Gnielinski, A. Zukauskas, and A. Skrinska, ‘‘Banks of Plain and Finned Tubes,’’ Section 2.5.3,
HEDH.
37. P. Minton, ‘‘Designing Spiral-Plate Heat Exchangers,’’ Chem. Eng. 77(9) (May 4, 1970).
38. A. Cooper and J. D. Usher, ‘‘Plate Heat Exchangers,’’ Section 3.7, HEDH.
39. J. Marriott, ‘‘Performance of an Alfaflex Plate Heat Exchanger,’’ Chem. Eng. Prog. 73(2), 73–78
(1977).
40. D. Chisholm, ‘‘Heat Pipes,’’ Section 3.10, HEDH.
41. J. S. Truelove, ‘‘Furnaces and Combustion Chambers,’’ Section 3.11, HEDH.
42. W. R. Penney, ‘‘Agitated Vessels,’’ Section 3.14, HEDH.
43. A. R. Guy, ‘‘Double-Pipe Heat Exchangers,’’ Section 3.2, HEDH.
44. J. Taborek et al., ‘‘Fouling—The Major Unresolved Problem in Heat Transfer,’’ Chem. Eng. Prog.
65(92), 53–67 (1972).
45. Proceedings of the Conference on Progress in the Prevention of Fouling in Process Plants, sponsored
by the Institute of Corrosion Science Technology and the Institute of Chemical Engineers, London,
1981.