Page 345 - Mechanical Engineers' Handbook (Volume 4)

334 Heat Exchangers, Vaporizers, Condensers

46. J. W. Suitor, W. J. Marner, and R. B. Ritter, ‘‘The History and Status of Research in Fouling of
Heat Exchangers in Cooling Water Service,’’ Canad. J. Chem. Eng. 55 (Aug., 1977).
47. A. Cooper, J. W. Suitor, and J. D. Usher, ‘‘Cooling Water Fouling in Plate Exchangers,’’ Heat
Transfer Eng. 1(3) (1979).
48. R. B. Ritter and J. W. Suitor, ‘‘Seawater Fouling of Heat Exchanger Tubes,’’ in Proceedings of the
2nd National Conference on Complete Water Reuse, Chicago, 1975.
49. C. H. Gilmour, ‘‘No Fooling–No Fouling,’’ Chem. Eng. Prog. 61(7), 49–54 (1965).
50. J. V. Smith, ‘‘Improving the Performance of Vertical Thermosiphon Reboilers,’’ Chem. Eng. Prog.
70(7), 68–70 (1974).
51. J. C. Chenoweth, ‘‘Flow-Induced Vibration,’’ Section 4.6, HEDH.
52. C. C. Gentry, R. K. Young, and W. M. Small, ‘‘RODbaffle Heat Exchanger Thermal-Hydraulic
Predictive Methods,’’ in Proceedings of the 7th International Heat Transfer Conference, Munich,
1982.
53. A. C. Mueller, ‘‘Criteria for Maldistribution in Viscous Flow Coolers,’’ in Proceedings of the 5th
International Heat Transfer Conference, HE 1.4, Tokyo, Vol. 5, pp. 170–174.
54. W. F. Berg and J. L. Berg, ‘‘Flow Patterns for Isothermal Condensation in One-Pass Air-Cooled
Heat Exchangers,’’ Heat Transfer Eng. 1(4), 21–31 (1980).
55. G. Breber, J. W. Palen, and J. Taborek, ‘‘Study on Non-Condensable Vapor Accumulation in Air-
Cooled Condensers,’’ in Proceedings of the 7th International Heat Transfer Conference, Munich,
1982.
56. A. Blumenkrantz and J. Taborek, ‘‘Application of Stability Analysis for Design of Natural Circulation
Boiling Systems and Comparison with Experimental Data,’’ AIChE Symp. Ser. 68(118) (1971).
57. V. L. Streeter, Fluid Mechanics, McGraw-Hill, New York, 1958.
58. E. A. D. Saunders, ‘‘Shell and Tube Heat Exchangers, Elements of Construction,’’ Section 4.2,
HEDH.
59. F. W. Schmidt, ‘‘Thermal Energy Storage and Regeneration,’’ in Heat Exchangers Theory and Prac-
tice, J. Taborek et al. (eds.), Hemisphere, McGraw-Hill, New York.
60. J. C. Chen, ‘‘Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow,’’ Ind.
Eng. Chem. Proc. Design and Dev. 5(3), 322–339 (1966).
61. D. Steiner and J. Taborek, ‘‘Flow Boiling Heat Transfer in Vertical Tubes Correlated by an Asymp-
totic Method,’’ Heat Transfer Engineering 13(3), 43 (1992).
62. Y. Katto, ‘‘Generalized Correlation of Critical Heat Flux for Forced Convection Boiling in Vertical
Uniformly Heated Round Tubes,’’ International Journal of Heat Mass Transfer 21(12), 1527–1542
(1978).
63. N. Kattan, J. R. Thome, and D. Farrat, ‘‘Flow Boiling in Horizontal Tubes: Part 3—Development
of a New Heat Transfer Model based on Plow Pattern,’’ Journal of Heat Transfer 120(1), 156–164
(1998).
64. K. W. McQuillan and P. B. Whalley, ‘‘A Comparison Between Flooding Correlations and Experi-
mental Flooding Data for Gas–Liquid Flow in Vertical Circular Tubes,’’ Chemical Engineering Sci-
ence 40(8), 1425–1440 (1988).
65. C. H. Gilmour, ‘‘No Fooling, No Fouling,’’ Chemical Engineering Progress, 61(7), 49–54 (1965).