Page 331 - Mechanics of Asphalt Microstructure and Micromechanics

Applications of Discrete Element Method 323

Buttlar, W. G. and You, Z. (2001). Discrete element modeling of asphalt concrete: microfabric ap-
proach. Transportation Research Record, No.1757, pp.111–118.
Carmona, H.A., Kun, F., Andrade, J. S. and Herrmann, H. J. (2007). Computer simulation of
fatigue under diametrical compression. Physical Review E, Vol.75, No.4, pp.1–8.
Chang, G.K., and Meegoda, J.N. (1997). Micromechanical simulation of hot mixture asphalt.”
Journal of Engineering Mechanics, Vol.123, No.5, pp.495–503.
Chang, K.G. and Meegoda, J.N. (1999). Micromechanical Model for Temperature Effects of Hot-
Mix Asphalt Concrete. Transportation Research Record, No.1687, 95-103.
Chen, Y.-C. and Hung, H.-Y. (1991). Evolution of shear modulus and fabric during shear defor-
mation. Soils and Foundations, Vol.31, No.4, pp.148–160.
Cheung, C.Y. and Cebon, D. (1997). Thin Film Deformation Behaviour of Power Law Creeping
Materials. Journal of Engineering Mechanics, Vol.123, No.11, pp. 1138–1152.
Collop, A. C., McDowell, G. R. and Lee, Y. W. (2004). Use of the Distinct Element Method to
Model the Deformation Behavior of an Idealized Asphalt Mixture. Taylor and Francis,
London.
Collop, A. C., McDowell, G. R. and Lee, Y. W. (2006). Modeling dilation in an idealized asphalt
mixture using discrete element modeling. Granular Matter, Vol.8, No.3–4, pp.175–184.
Collop, A. C., McDowell, G. R. and Lee, Y.W. (2007). On the use of discrete element modeling to
simulate the viscoelastic deformation behavior of an idealized asphalt mixture. Geomechan-
ics and Geoengineering, Vol.2, No.2, pp.77–86.
Cundall, P. A. (1971). A computer model for simulating progressive large scale movements in
blocky rock systems. Proc., Symposium of the International Society of Rock Mechanics, Nancy,
France, Vol.1, Paper No.II-8, pp.129–136.
Cundall, P. A., and Strack, O. D. L. (1979). A discrete numerical model for granular assemblies.
Geotechnique, Vol.29, No.1, pp.47–65.
Cundall, P.A., Drescher, A. and Strack, O.D.L. (1982). Numerical experiments on granular as-
semblies: measurements and observations. IUTAM Conference on Deformation and failure of
granular materials (Eds: Vermeer and Luger), pp.355–370, Balkema.
Cundall, P.A. and Hart, R.D. (1992). Numerical modeling of discontinua. Engineering Computa-
tions, Vol.9, pp.101–113.
Dai, Q.L, and You, Z. (2007). Prediction of creep stiffness of asphalt mixture with micromechani-

cal finite element and discrete element models. Journal of Engineering Mechanics, Vol.133,
No.2, pp.163–173.
Dickens, J.G., and Walker, P.J. (1996). Use of distinct element model to simulate behavior of dry-
stone walls. Structural Engineering Review, Vol.8, No.2–3, pp.187–199.
Fu, Y. (2005). DEM Simulation and experimental validation of micro-macro behaviors of
granular materials using X-ray tomography imaging. Ph.D. Dissertation, Louisiana State
University.
Fu, Y., Wang, L. and Tumay, M.T. (2007). Experimental quantification and DEM simulation of

irregular particle kinematics and local Strains. Journal of Mechanics and Materials, Vol.134,
No.2, pp.143–154.
Fu, Y.R., Wang, L.B. and Zhou, C.B. (2010). 3D clustering dem simulation and non-invasive

experimental verification of shear localization in irregular particle assemblies. A Special
Issue of IJPE on Multiscale Characterization and Modeling of Stone-based Infrastructure Materials.
Guest Editors: Linbing Wang and Erol Tutumluer. In Press.
Gantt, J.A. and Gatzke, E.P. (2005). Discrete element method application for verification of ki-

netic theory of granular flow in a high shear mixer. Cincinnati, OH, United States: American
Institute of Chemical Engineers, New York, NY 10016-5991.
Gethin, D.T., Yang, X.S. and Lewis R.W. (2006). A two dimensional combined discrete and fi nite
element scheme for simulating the flow and compaction of systems comprising irregular

particulates. Computer Methods in Applied Mechanics and Engineering, Vol.195, pp.5552–5565.