Page 430 - Mechanics of Asphalt Microstructure and Micromechanics

T
422 Ch a p t e r w e l v e

Ko, H.Y. and Scott, R.F. (1967). A new soil testing apparatus. Geotechnique, Vol.17, No.1, pp.40–57.
Kuwano, R., Connolly, T.M. and Jardine, R.J. (2000). Anisotropic stiffness measurements in a
stress-path triaxial cell. Geotechnical Testing Journal, Vol.23, No.2, pp.141–157.
Kutay, M.E., Aydilek, A.H., Masad, E. and Harman, T. (2006). Computational and experimental
evaluation of hydraulic conductivity anisotropy in hot-mix asphalt, International Journal of
Pavement Engineering, Vol. 8, No. 1, pp.29–43.
Lade, P.V. and Duncan, J.M. (1973). Cubical triaxial tests on cohesionless soil. ASCE Journal of Soil
Mechanics, Vol.99, SM10, pp.793–812.
Li, X. and Wang, L.B. (2008). Simultaneous determination of bimoduli of asphalt material
with single viscoelastic beam. International Journal of Pavement and Technology, Vol.1, No.2,
pp.57–63.
Li, X.S. and Dafalias, Y.F. (2002). Constitutive modeling of inherently anisotropic sand behavior.
Journal of Geotechnical and Geoenvironmental Engineering, Vol.128, No. 10, pp. 868–880.
Liang, R.Y., Abu Alfoul, B.A. and Mohammad, K. (2006). Laboratory investigation of anisotropic
behaviour of HMA. 2006 International Conference on Perpetual Pavement. Hilton Columbus at
Easton Columbus, Ohio
Masad, E., Tashman, L., Somedavan, N. and Little, D. (2002). Micromechanics-based analysis
of stiffness anisotropy in asphalt mixtures. Journal of Materials in Civil Engineering, Vol.14,
No.5, pp.374–383.
NeSmith, W. M. (1997). Development of a computer controlled multiaxial cubical testing appara-
tus. M.Sc. Thesis, Georgia Institute of Technology, Atlanta, GA.
Pan, E. (1989). Static response of a transversely isotropic and layered half space to general sur-
face loads. Physics of the Earth and Planetary Interiors, Vol.54, pp.353–363.
Pennington, D.S., Nash, D.F.T. and Lings, M.L. (2001). Horizontally mounted bender elements
for measuring anisotropic shear moduli in triaxial clay specimens. Geotechnical Testing Jour-
nal, Vol. 24, No.2, pp.133–144.
Roy, D., Campanella, R.G., Byrne, P.M. and Hughes, J. (2002). Undrained anisotropic monotonic
behavior of sand from in situ tests. Journal of Geotechnical and Geoenvironmental Engineering,
Vol.128, No.1, pp.85–91.
Secor, K.E. and Monismith, C.L. (1965). Viscoelastic response of asphalt paving slabs under creep
loading. Highway Research Record, No. 67, pp.84–97
Seyhan, U. and Tutumluer, E. (2002). Anisotropic modular ratios as unbound aggregate perfor-
mance indicators. Journal of Materials in Civil Engineering, Vol.14, No.5, pp 409–416.
Sture, S. and Desai, C.S. (1979). A fluid cushion truly triaxial or multiaxial testing device. ASTM

Geotechnical Testing Journal, Vol. 2, No.1, pp.20–33.
Sture, S. (1979). Development of multiaxial cubical test device with pore-water pressure moni-
toring facilities. Report No. VPI-E-79.18, Dept of Civil Engineering, Virginia Polytechnic Institute
and State University, Blacksburg, VA.
Tutumluer, E., Adu-Osei, A., Little, D.N. and Lytton, R.L. (2001). Field validation of the cross-
anisotropic behavior of unbound aggregate bases. ICAR-502-2.
Von Quintas, H.L., Rauhut, J.B. and Kennedy, T.W. (1982). Comparisons of Asphalt concrete stiff-
ness as measured by various testing techniques. Proceeding of Association of Asphalt Paving
Technologist, Vol. 51, 1982, pp.35-49.
Wang, L.B., Hoyos, L.R., Mohammad, L. and Abadie, C. (2005a). Characterization of asphalt con-
crete by multi-stage true triaxial testing. Journal of ASTM International, Vol.2, No.10, pp.7–16.
Wang, L.B., Hoyos L.R., Wang, X., Voyiadjis, G. and Abadie, C. (2005b). Anisotropic properties of
asphalt concrete: characterization and implications in pavement analysis and design. ASCE
Journal of Engineering Mechanics, Vol.17, No.5, pp.535–543.
Wof, K. (1935). Ausbreitung der kraft in der halbebene und im halbraum bei anisotropem mate-
rial. Zeitschrift f. Angew. Math. Und Mech., B.15, H.5.