Page 429 - Mechanics of Asphalt Microstructure and Micromechanics

Characterization and Modeling Anisotropic Proper ties of Asphalt Concrete 421

References
AASHTO Designation T 322. (2007). Determining the creep compliance and strength of hot-mix
asphalt (HMA) using the indirect tensile test device. AASHTO Standards, Washington,
D.C., American Association of State Highway Transportation Offi cials.
AASHTO Designation TP 62. (2005). Determining dynamic modulus of hot-mix asphalt concrete
mixtures. AASHTO Provisional Standards, Washington, D.C., American Association of State
Highway Transportation Offi cials.
Adu-Osei, A, Little, D.N. and Lytton, R.L. (2001). Cross-anisotropic characterization of unbound
granular materials. Transportation Research Record, No. 1757, pp.82–91.
Airey, D.W. and Wood, D.M. (1988). The cambridge true triaxial apparatus. advanced triaxial
testing of soil and rock, STP 977, ASTM, Philadelphia, PA, pp.796–805.
Arthur, J.R.F. (1988). Cubical devices: versatility and constraints. advanced triaxial testing of soil
and rock, STP 977. ASTM, Philadelphia, PA, pp.743–765.
Atkinson, R.H. (1972). A cubical test cell for multiaxial testing of materials. Ph.D. Dissertation,
University of Colorado at Boulder, Boulder, CO.
Bonaquist, R., Anderson, D.A. and Fernando, E. (1986). Relationship between moduli measured
in the laboratory and fi eld defl ection measurements. Proc. Association of Asphalt Paving Tech-
nologist, Vol. 55, pp.419–448.
Boulbibane, M., Weichert, D. and Raad, L. (1999). Numerical application of shakedown theory
to pavements with anisotropic layer properties. Transportation Research Record, No.1687,
pp.75–81.
Chen, Y.G., Pan, E. and Green, R. (2009). Surface loading of a multilayered viscoelastic pave-
ment: semianalytical solution. Journal of Engineering Mechanics, Vol.135, pp.517–528
Chen, Y.G. and Pan, E. (2008). Responses of transversely isotropic layered half-space to multiple
horizontal loads. ASCE Geotechnical Special Publication, No. 182, Pavements and Materials:
Characterization, Modeling and Simulation, pp.63–77.
Christensen, D.W. and Bonaquist, R.F. (2004). Evaluation of indirect tensile test (IDT) procedures
for low-temperature performance of hot mix asphalt. NCHRP Report 530.
Cooley, L.A. Jr, Brown, E.R. and Maghsoodloo, S. (2001). Development of critical fi eld perme-
ability and pavement density values for coarse-graded superpave pavements. NCAT Report
01-03. National Center for Asphalt Technology. Auburn, AL.
Daniel, J.S. and Lachance, A. (2005). Mechanical and volumetric properties of asphalt mixtures
with recycled asphalt pavement. Transportation Research Record, No. 1929, pp.28–36.
Green, G.E. (1971). Strength and deformation of sand measured in an independent stress control
cell. In stress-strain behavior of soils. Proceedings of the Roscoe Memorial Symposium, G.T. Foulis
and Co. Ltd., Cambridge, England, pp.285–323.
Gere, J.M. and Timoshenko, S.P. (1984). Mechanics of Materials, 2nd Edition. PWS-KENT Publish-
ing Company, Boston.
Hambley, E.C. (1969). A new triaxial apparatus. Geotechnique, Vol. 19, No.2, pp.307-309.
Harris, C.H. (2007). Hot Mix Asphalt Permeability: Tester Size Effects and Anisotropy. Master
Thesis, Virginia Tech.
Johnson, K.L. (1985). Contact Mechanics. Cambridge University Press, Cambridge.
Kallas, B.F. (1970). Dynamic modulus of asphalt concrete in tension and tension-compression.
Proceedings of Association of Asphalt Paving Technologist, Vol. 39, pp.1–20.
Khanal, P.P. and Mamlouk, M.S. (1995). Tensile versus compressive moduli of asphalt concrete.
Transportation Research Record, No.1492, pp.144-150.