Page 65 - Mechanics of Asphalt Microstructure and Micromechanics

T
58 Ch a p t e r w o

Dongre, R. and D’Angelo, J. (2003). Refinement of Superpave high-temperature binder specifi ca-
tion based on pavement performance in the accelerated loading facility. Transportation Research
Record, No.1829, pp.39–46.
Fischer-Cripps, A. C. (2004). Nanoindentation. 2nd Edition. Springer-Verlag, New York.
Goodman, R. E. (1980). Introduction to Rock Mechanics. John Wiley and Sons Inc., New York.
Ha, K. and Schapery, R.A. (1998). A three-dimensional viscoelastic constitutive model for particulate com-
posites with growing damage and its experimental verifi cation. Intl. J. of Solids and Struct., Vol.35,
No.26–27, pp.3497–3517.
Harvey, J.A.F. and Cebon, D. (2003). Failure mechanisms in viscoelastic fi lms. J. of Mater. Sc. Vol.38,
pp.1021–1032.
Harvey, J.A.F., and Cebon, D. (2005). Fracture tests on bitumen fi lms. J. of Materials in Civil Engr. Vol.17,
No.1, pp.99–106.
Hirose, H., Tsuyuki, U. and Wada, Y. (1963). Physical properties of asphalt at different stages of blowing
process. Oyobutsur, Vol.32, pp.29–36.
Kelsall, R.W., Hamley, I.W. and Geoghegan, M. (2005). Nanoscale Science and Technology. John Wiley and
Sons Inc., Chichester, England.
Kim, Y.R. (2009). Modeling of Asphalt Concrete. ASCE Press, McGraw Hill, USA.
Li, X. and Wang, L. (2008). Simultaneous determination of bimoduli of asphalt material with single visco-
elastic beam. Intl. J. of Pavm. Res. and Techn., Chinese Society of Pavement Engineering, Vol.1, No.2,
pp.57–63.
Nadai, A. (1963). Theory of Flow and Fracture of Solids, Vol.2. McGraw Hill, New York.
Oliver, W.C. and Pharr, G.M. (1992). An improved technique for determining hardness and elastic
modulus using load and displacement sensing indentation experiments. J. Mater. Res., Vol.7, No.6,
pp.1564–1583.
Ossa, E.A., Deshpande, V.S. and Cebon, D. (2005a). Phenomenological model for monotonic and cyclic
behavior of pure bitumen. J. of Materials in Civil Engr. Vol.17, No.2, pp.188–197.
Ossa, E.A., Deshpande, V.S. and Cebon, D. (2005b). Spherical indentation behavior of bitumen. Acta
Materialia, Vol.53, pp.3103–3113.
Petersen, J.C. (1984). Chemical composition of asphalt as related to asphalt durability: state of the art.
Transportation Research Record, No.999, pp.13–30.
Puzinauskas, V.P. (1967). Evaluation of properties of asphalt cements with emphasis on consistencies at
low temperature. Proc. Assoc. Asph. Pav. Technol., Vol.36, pp.489–540.
Puzinauskas, V.P. (1979). Properties of asphalt cements. Proc. Assoc. Asph. Pav. Technol., Vol.48, pp.646–710.
Ramamurthy, T. (1993). Chapter 13: Strength and modulus response of anisotropic rocks. Comprehensive
Rock Engineering, Pergamon, U.K., Vol. 1, pp.313–329.
Roberts, F.L., Kandhal, P.S., Brown, E.R., Lee, D-Y. and Kennedy, T.W. (1996). Hot Mix Asphalt, Mixture
Design, and Construction. 2nd Edition. National Asphalt Pavement Association Education Foundation
Inc., Lanham, MD.
Schmidt, R.J. and Barrall, E.M. (1965). Asphalt transitions. J. of the Institute of Petroleum, Vol.51,
pp.162–168.
Shenoy, A. (2001a). Refinement of the Superpave specification parameter for performance grading of

asphalt. J. of Transp. Engr., Vol.127, No.5, pp.357–362.
Shenoy, A. (2001b). High temperature performance grade specification of asphalt binder from the

material’s volumetric-fl ow rate. Mat. and Struct., Vol.34, pp.629–635.
Shenoy, A. (2002). Estimating the unrecovered strain during a creep recovery test from the material’s
volumetric-flow rate (MVR). The Intl. J. of Pavm. Engr., Vol.3, pp.1–13.

Shenoy, A. (2004). High temperature performance grading of asphalts through a specifi cation criterion
that could capture fi eld performance. J. of Transp. Engr., Vol.130, No.1, pp.132–137.
Vinci, R.P., and Vlassak, J.J. (1996). Mechanical behavior of thin fi lms. Annu. Rev. Mater. Sci., Vol.26,
pp.431–62.
Wada, Y., and Hirose, H. (1960). Glass transition phenomena and rheological properties of petroleum
asphalt, Journal of the Physical Society of Japan, Vol.15, No.10, pp.1885–1894.
Wang, L., Hoyos, L.R., Wang, J., Voyiadjis, G. and Abadie, C. (2005). Anisotropic properties of asphalt
concrete: characterization and implications for pavement design and analysis. J. of Mat. in Civil Engr.,
Vol.17, No.5, pp.535–543.
Wang, D. (2007). Binder Film Thickness Effect on Aggregate Contact Behavior, M.S. Thesis, Department of
Civil and Environment Engineering, Virginia Tech.
Whiteoak, D. (1990). The Shell Bitumen Handbook, Shell Bitumen, UK, London.
Zhang, L.Y. (2005). Engineering Properties of Rocks. Elsevier Geo-Engineering Book Series, Vol. 4, Elsevier Ltd.